Make precise angled cuts from -60 to +60 degrees with your track saw or router by connecting the Angle Stop to a guide rail for repeatable positioning.

To install, simply slide it onto the guide rail and throw the green lever of the spring draw latch to clamp it in place. The Angle Stop can be positioned anywhere along the track, so can register off of the front or back edge of the workpiece.

Detents at 0, +/-15, +/-22.5, +/-30, and +/-45 degrees allow rapid and accurate angle adjustments and a thumbscrew securely locks the position. The machined cursor and detent positioning is adjustable, should calibration be required.

For increased accuracy, use one or two clamps to secure the guide rail to the work piece, and positioning bolts to the underside of the Angle Stop for increased registration - especially on thicker, or profiled workpieces such as a bullnosed countertop.

The accessory guide extension FS-WA-VL (sold separately) has a scale and adjustable flag stop to make repeated cuts at the same dimension.