Description
A tough, shock-resistant worklight that puts out up to 769 lumens of daylight evenly cast over 170 degrees. Ideal for illuminating a cabinet, closet, attic or other poorly-lit area. The compact light has a specially-shaped body to provide multiple positions to aim the light as well as a rafter hook and 1/4-20 tripod mount.
Set includes the SysLite Adapter.
SysLite II features
Diffuse light
The 12 high-efficiency LEDs provide a very even spread of light without harsh hot spots or glare.
2 output settings
Press the power button to activate stage 1, producing 310 Lumens. Press it again to reach stage 2 which produces 769 Lumens.
Long battery life
The internal battery provides up to 5.5 hours of light at stage 1, and 2.17 hours of light at stage 2. A Festool lithium-ion battery pack can be slid on to the back for even more light without cables (remove the rafter hook), or the unit can be plugged in for continuous operation.
SysLite Adapter features
Ball joint for positioning
Rotate and swivel the SysLite to direct light where required. The large thumb screw secures the positioning so it won't move, and is large enough to be operated easily with gloves.
Magnetic base with rubber cover
A pattern of rare-earth magnets provides secure attachment to ferrous surfaces including corner bead, steel and cast iron surfaces. A rubber coating protects surfaces from damage and keeps the adapter from slipping.
Steel attachment plate included
For attachment to non-ferrous surfaces, a steel plate is included that can be attached with a single screw. Ideal for use on ladders or wooden cabinets or shop fixtures.
Pass through slot for a clamp
The pass-through window in the base allows a Festool FS Clamp to be used to clamp the adapter to non-ferrous materials such as wood studs or fibreglass ladders.
1/4-20 threaded stud
The common thread allows the SysLite to be quickly attached to the adapter. This is the same thread used for most cameras, so may be used with other items as well.
Specifications
- 310 or 769 Lumens
- 2 hours 10 minutes or 5 hours 30 minutes runtime
- 2 hours 40 minutes to charge internal battery to 90%
- 3 hours 20 minutes to charge internal battery to 100%
- 0 to 45 degrees Celsius permitted temperature range for battery charging
- IP 2X protected
- 40 millimetre (1-1/2 inch) hook opening
- 0.7 kilograms (1.543 pounds)
- 80 x 100 x 150 millimetres (3 x 4 x 6 inches)
- 12x 1.5 watt LEDs
- -5 to 55 degrees Celsius (23 to 131 degrees Fahrenheit) permissible operating temperature range