Description
Wera Tools 19-Piece Metric Turbo 1 Kraftform Kompakt Screwdriver features a switchable gear action to multiply the rotational action by 4 times. To use, press the button to activate Turbo mode, then use one hand to hold the front while turning the back section with the other hand. The set includes a selection of 18 screwdriver bits and an organizing roll.
Switchable steel gears increase speed of Wera Tools Turbo 1 Kraftform Kompakt Screwdriver
Built inside the Kraftform handle is a set of steel universal gears that are made to be maintenance-free. To increase screwdriving speed, press the button at the back of the handle and turn fasteners at 4 times the speed.
When high torque is required, switch off the turbo function and apply force of up to 14 Nm.
Turbo 1 Kraftform Kompakt Screwdriver features Wera Rapidapter 1/4 inch hex bit holder
The Rapidaptor allows speedy changing between any conventional 1/4 inch hex screwdriver bits, and the free-rotating sleeve provides a control point from which to hold and guide the tool with your other hand.
To install a bit in the Rapidaptor, simple insert the bit. To remove, slide the sleeve forwards and remove the bit.
Wera Tools 19-Piece Metric Turbo 1 Kraftform Kompakt Screwdriver Set scope of delivery
- 826 T Kraftrofm Turbo bit-holding screwdriver with Rapidaptor 1/4 inch quick-release chuck
- 3x 851/4 Z Phillips 89mm screwdriver bits (PH 1, PH 2, PH 3)
- 3x 855/4 Z Pozidriv 89mm screwdriver bits (#1, #2, #3)
- 5x 867/4 Z Torx 89mm screwdriver bits (T-10, T-15, T-20, T-25, T-30)
- 4x 840/4 Z hex 89mm screwdriver bits (3, 4, 5, 6mm)
- 3x 800/4 Z slot 89mm screwdriver bits (0.8 x 4, 1 x 5.5, 1.2 x 6.5mm)
- Hook and loop fastener strip 120 x 50mm
