Description
Wera Tools 19-Piece Imperial Turbo 1 Kraftform Kompakt Screwdriver features a switchable gear action to multiply the rotational action by 4 times. The set includes a selection of 18 screwdriver bits and an organizing roll. To use, press the button to activate Turbo mode, then use one hand to hold the front while turning the back section with the other hand.
Switchable steel gears increase speed of Wera Tools Turbo 1 Kraftform Kompakt Screwdriver
Built inside the Kraftform handle is a set of steel universal gears that are made to be maintenance-free. To increase screwdriving speed, press the button at the back of the handle and turn fasteners at 4 times the speed.
When high torque is required, switch off the turbo function and apply force of up to 14 Nm.
Turbo 1 Kraftform Kompakt Screwdriver features Wera Rapidapter 1/4 inch hex bit holder
The Rapidaptor allows speedy changing between any conventional 1/4 inch hex screwdriver bits, and the free-rotating sleeve provides a control point from which to hold and guide the tool with your other hand.
To install a bit in the Rapidaptor, simple insert the bit. To remove, slide the sleeve forwards and remove the bit.
Wera Tools 19-Piece Imperial Turbo 1 Kraftform Kompakt Screwdriver Set scope of delivery
- 826 T Kraftrofm Turbo bit-holding screwdriver with Rapidaptor 1/4 inch quick-release chuck
- 3x 851/4 Z Phillips 89mm screwdriver bits (PH 1, PH 2, PH 3)
- 5x 867/4 Z Torx 89mm screwdriver bits (T-10, T-15, T-20, T-25, T-30)
- 4x 840/4 Z hex 89mm screwdriver bits (3/32, 1/8, 5/32, 3/16 inch)
- 3x 868/4 Square-Plus 89mm screwdriver bits (#1, #2, #3)
- 3x 800/4 Z slot 89mm screwdriver bits (0.8 x 4, 1 x 5.5, 1.2 x 6.5mm)
- Hook and loop fastener strip 120 x 50mm
