Return Policy
Available starting September 23. Pre-order now to reserve yours.
Festool Depth Position Indicator Accessory Kit contains everything you need for precise plunge cuts at any depth. Includes Depth Indicators for TS(C) 55 track saws and a pair of one-hand clamps in a Systainer SYS3 M 112.
The Depth Position Indicator shows the exact entry and exit points of the blade, allowing more accurate work without risk of overcutting even when visibility is limited.
Precise setups for the beginning and end of cuts
The Depth Position Indicator clearly shows the exact entry and exit of the blade at any depth so you can confidently cut right up to the line even if you can't see it when cutting.
Reversible design works on both sides of the guide rail
Working near a wall or other obstruction? No problem. The symmetrical design of the Depth Position Indicator allows the stop gauges to be attached to the left side of the guide rail so the Indicator can be used near a wall.
Depth Position Indicator shows you exactly where the cut will be
The clear scale and indicators show not only the start and stop of the cut, but also the right side of the kerf so you can set up confidently without additional spacers, measuring, or test cuts. Plus, calibration is simple after just a simple test cut.
Applications
The Festool Depth Position Indicator for Guide Rails is ideal for making cutouts for sink opening, panel cutouts, or any time you need to make a cut with a precise start and/or end.
For with Festool TS 55 R, TS 55 F, TSC 55 K, and TSC 55 KS and requires FS Guide Rail (neither included).
