Tormek Knife Sharpening Jigs
Add these Jigs to any Tormek water cooled sharpening machine for a complete and exceptional knife sharpening system.
- SVM-45 - Knife Jig -For most stiff blade knives. Min. blade length 60 mm (2 3/8""). The clamp is 45 mm (1¾"") long. (Use this jig for hard to sharpen drawknives.The jig rests freely on the Universal Support so you can follow the curve of the blade)
- SVM-00 - Small Knife Holder - Use this holder with the Knife Jig SVM-45 for complete control on a wide range of small knives, including straight and curved carving knives.
- SVM-140 - Long Knife Jig - This jig is developed especially for long and flexible knives, e.g. filleting knives. Its larger width, 140 mm (5½""), stabilizes a long and thin blade. The jig holds blades longer than 160 mm (6¼"").
- SVS-38 Short Tool Jig - For straight shanked tools, such as wood chisels, carving gouges and tools for power carvers. Always a perfect edge, as tools are held at 90° towards the grindstone.
Tormek also offers additional jigs for axes, turning and carving tools, chisels, planer blades, moulder blades, drill bit sharpening and even scissors and shears. Add special purpose Grindstones for even greater flexibility.
With the Tormek system, You can easily, quickly and perfectly sharpen practically any tool to a perfect edge.The low rpm water cooled system ensure precise tool preparation with no possibility of overheating and ruining the edge.
Note that all the Tormek jigs will work perfectly on the both the T7 AND T4 machines.