Why a precision bench dog? If you look at the Festool MFT work tables; you will notice the holes are set in a precise grid.
With Qwas Dogs you can take advantage of that grid to make perfect cuts; whether cross cuts; rip cuts; or 45 degree cuts.
Qwas Dogs are great for holding a workpiece while sanding; sawing; planing; or glueing up a project. Anything that requires holding your workpiece still or requires a perfect 90 degree angle; Qwas Dogs will work. 2 pairs of Qwas Dogs allows you test the squareness of work pieces; squares. or help in glueing up your projects.
The Rail Dogs are ideal for making longitudinal cuts or 45 degree miter cuts on the MFT Table. The Rail Dogs are designed to slip onto any Plunge Saw Guide Rail and then slide into 20 mm holes. This allows the rail to be aligned with the holes on the Festool MFT. The Rail Dogs 3 inch height allows for a full depth cut on 8/4 wood.
Qwas Dogs are designed to utilize the full depth of the holes for proper alignment. The small shoulders assures the dogs are aligned with the hole rather than inaccuracies in the table surface from glue; saw kerfs; or water spillage.
Qwas Dogs sit less than .45 inch above the table top allowing you to work on anything from 1/2 plywood to 12/4 hardwood. Perfect for sanding and sawing 1/2 inch plywood.
When you understand the precise grid layout on these great work tables have; why use anything less than a precision bench dog; the Qwas Dog?