Lamello Zeta P2-Set Anniversary Edition with Diamond Blade in Systainer
The Zeta P2 Jointer Jubilee Edition is fitted with the P-System depth adjuster and a diamond blade. The anniversary edition Zeta offers more than the standard biscuit jointer, with an undercut function to allow for the fitting of special concealed Clamex P connectors that slide into the 'T' slot produced.
Unique to Lamello, the jointer has a special vertical mechanical drive (VMD) engaging when the jointer is at full plunge, moving the cutter up and down in one full turn and only then disengaging to produce the 'T' slot to accept the special Clamex biscuit. The undercut function can be switched off and a 7mm slot will be produced; a 'Bisco' biscuit can then be used. Replace the special blade with a 4mm biscuit blade and use as a standard biscuit jointer. The new P-System depth adjuster has 5 settings for the ever growing range of Clamex connectors and when used with a standard biscuit jointing blade.
As with all Lamello products, design and build are of the highest quality. Other features include precise plunge with clear depth setting and jointer fences with flush sides to make positioning simple; the fence fits with 'V' grooves for accuracy and clear angle scale.
- Zeta P2 Anniversary Edition
- P-System cutter, DP
- Stop square
- Suction stub 23 + 36 mm
- Disc for angles
- Spacer 2 mm
- Spacer 4 mm
- P-System drill jig including drill bit
- Special 50th anniversary edition fitted with diamond blade
- Unique dual function biscuit jointer
- Produces special 'T' slot for Clamex P joiners
- Can also be used as standard biscuit jointer