{"product_id":"flair-woodworks-design-direct-mount-infinitely-adjustable-2-port-suction-controller-anti-static-ct-switcher-d","title":"Flair Woodworks \u0026 Design Direct-Mount Infinitely Adjustable 2-Port Suction Controller, Anti-Static CT-SWITCHER-D","description":"\u003cp class=\"p1\"\u003eDesigned specifically for Festool CT 26, 36, and 48 series dust extractors, the CT Switcher-D Suction Controller is a sleek solution to the challenge of switching dust extraction between two tools or bleeding excess suction. It is ideal for use in small or large workshops, or on-site, and provides full control over the ratio of airflow through each port.\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003eSimple and intuitive sliding adjustment\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003eControl the amount of suction going to each port simply by sliding Suction Controller left or right. Get full suction at either end, or position Suction Controller anywhere in the middle to share suction with both ports. This is ideal for tools with two dust extraction ports like routers, for bleeding excess suction when working with sanders and sanding blocks, and for sharing the dust extractor with another user.\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003eMaximize one dust extractor and save time and money\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003eTwo dust extractors cost twice as much, weigh twice as much, take up twice as much space, and require twice as much maintenance. Suction Controller allows you to switch between tools in a flash so your workflow isn't interrupted. No more searching for hose ends and no more lost time exchanging hoses. Don't double your investment. Get a Suction Controller instead.\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003eCompact and minimal design\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003eSpace is valuable. Whether you work in a condo, basement, garage, mobile workshop or other small shop, you fully understand. If your dust extractor lives besides or under your bench, you understand. Bulky things are hard to store, harder to work around, and more likely to be damaged. For a mobile dust extractor, a long Y-splitter is a big space waster.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe CT SWITCHER-D (D stands for “direct”!) is simple and compact, adding only a couple inches to the length of the dust extractor with no downsides compared to a conventional Y-splitter. Further, once installed, it looks like part of the tool.\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003eBetter than a Y splitter\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003eY splitters direct suction two ways so you can have two tools connected at once. That means, both tools have the same amount of suction which doesn’t make sense, since tools like saws and routers require more airflow than ones like sanders and joiners. Further, unless you remove a hose and cap an inlet, suction is ALWAYS flowing both ways. So, if you’re hopping back and forth between two tools, you’re only getting half the suction at each. That is far from optimal.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eCT SWITCHER-D Suction Controller allows you to connect two hoses AND gives you complete control over how the suction is directed.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"p1\"\u003e100% left, 0% right\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e85% left, 15% right\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e66% left, 34% right\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e50% left, 50% right\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e24% left, 76% right\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e0% left, 100% right\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003eor any other ratio. It’s up to you.\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003eEasy and secure tool-free installation\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003eCT SWITCHER-D Suction Controller mounts directly to your dust extractor without tools. It was designed for Festool’s CT 26\/36\/48 dust extractors but the 50mm (2 inch) port connects to most other dust extractors and shop vacuum systems. The precision taper fit allows secure mounting without tools. All that’s required is a good push for a secure connection. In fact, the fit is so secure that in our testing, we found we could pick up the entire dust extractor by the hose.\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003eSystem approach and quality throughout\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003eSystems work. When values are aligned, everything works together. CT SWITCHER-D Suction Controller is designed to integrate seamlessly with Festool CT 26\/36\/48 dust extractors and hoses. Each CT SWITCHER-D is made of tough, anti-static plastic with stainless steel hardware. Designed in Canada. Made in Canada. Assembled in Canada.\u003c\/p\u003e","brand":"Flair Woodworks \u0026 Design","offers":[{"title":"Default Title","offer_id":47733210513629,"sku":"FWD-CT-SWITCHER-D","price":99.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/Flair_Woodworks___Design_Direct-Mount_Infinitely_Adjustable_2-Port_Suction_Controller__Anti-Static_CT-SWITCHER-D_main.jpg?v=1782236946","url":"https:\/\/www.ultimatetools.ca\/products\/flair-woodworks-design-direct-mount-infinitely-adjustable-2-port-suction-controller-anti-static-ct-switcher-d","provider":"Ultimate Tools","version":"1.0","type":"link"}