Replaced by TSC 55 KEBI-F-Set-FS 577008
The result of years of system innovation, Festool's TSC 55 Cordless Track Saw is the most versatile, precise and refined cutting system available. With a pair of 18 volt batteries providing cordless portability and convenience, the saw can cut 100 metres (328 feet) of sheet goods in a single charge.
Create clean, straight cuts with a Festool guide rail with ease
When used on a Festool guide rail (55 inch guide rail included), the saw slides smoothly along the length of the cut and a straight cut is automatic. Three high-quality motor bearings ensure a smoother cut and longer tool life.
Choose your batteries
Equip the saw with two 18 volt, 6.2 Ah batteries for the maximum power and run time, or a single 15 or 18 volt battery for a lighter saw.
Make clean, splinter-free cuts every time
Festool guide rails feature a splinterguard on the bottom which serves as a zero-clearance support to ensure a splinter-free top surface. A second splinterguard can be fitted onto the TS 55 REQ housing to ensure splinter-free cuts on the offcut as well. Both splinterguards work for both square and bevel cuts.
Retractable riving knife reduces the chance of kickback
A riving knife is located right behind the blade to ensure that the material does not pinch the blade, reducing the chance of kickback. The splitter is spring-loaded so that the saw can be plunged into a panel and automatically drops down into the kerf when the saw is advanced. Furthermore, a built-in brake stops the blade quickly when the trigger is released.
MMC Electronics enhance safety and control
The tool starts up smoothly, eliminating jolting and voltage spikes. Adjust the speed infinitely within the speed range to suit the material and application, and know that the pre-selected speed will remain constant even when load is applied. Built-in temperature control prevents overheating by switching the tool off when critical temperature is reached in order to prolong its lifespan.
Superb dust collection
Make cuts without making a mess. Capture dust at the source by hooking up the TSC 55 REB to a wire-framed dust bag (included) or dust extractor (not included). The rotating dust port allows the hose to be positioned out of the way, or dust to be ejected away from the user.
Fast and easy blade changes
To change the blade on the TSC 55 REB, first rotate the FastFix lever to the forward position. This locks out the switch, locks the arbor, and allows the blade to be lowered to where the arbor bolt is accessible. The saw locks down in this position and the on-board hex key can be used to remove the arbor bolt.
Fast and simple micro-adjustable plunge depth
Squeeze and slide the depth stop to the desired depth of cut. A split depth scale indicates depth of cut on and off a Festool guide rail. Turn the fine-adjust knob to micro-adjust the cut depth.
Portable and transportable
The track saw and many of its accessories store away neatly in a compact and durable Systainer with custom-moulded insert (included). This makes it easy to ensure no parts are left behind or lost.
Expand the capabilities of the TSC 55 REB with accessories
Ripping a stack of gables to the same width, crosscutting shelves square, cutting stair tread to 15 degrees, and more are all simplified with optional accessories.
- 5.3 kilograms (11.7 pounds) with two batteries or 4.6 kilograms (10.1 pounds) with one battery
- 160 millimetre (6-1/4 inch) blade with 20 millimetre arbor hole
- 0 to 55 millimetre (0 to 2-1/8 inch) cutting depth at 90 degrees
- 0 to 43 millimetre (0 to 1-11/16 inch) cutting depth at 45 degrees
- 18/36 volt motor
- 27/36 millimetre (1-1/16/1-7/16 inch) inside/outside diameter dust extraction port
- -1 to 47 degree bevel range with stops at 0 and 45 degrees
Scope of delivery
- TSC 55 REBI-F Plunge Cut Track Saw
- 2x BP 18 Li 5.2 Ah ASI Airstream battery packs
- SCA 8 Airstream 8 amp Rapid Charger
- FS 1400 55 inch guide rail
- Chip collection bag
- Systainer SYS 5 T-Loc
- 48-tooth ATB fine saw blade
- 5 millimetre hex key
- Clear sight window
- Splinterguard with locking knob
- 30-Day Money Back Guarantee
- 3-Year Festool Service All-Inclusive Limited Warranty
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.