Pairing the TID with the HKC will make quick work of cutting and assembly at the framing stage of your construction project.
TID 18 Impact Driver features
This compact powerhouse offers an impressive service life thanks to its extremely robust hammer mechanism. The perfect combination of the new generation brushless EC-TEC motor and the battery pack ensures maximum performance, ergonomics and endurance.
Compact design enables you to work accurately and for longer without becoming tired, even in hard to reach areas.
The TID 18 cordless impact screwdriver offers extremely strong performance and ensures that work is tailored to the material with three speed settings. The clever T-mode detects the transition between sheet metal and wood and automatically adapts the speed.
With a long trigger pull you can incrementally adjust the speed to reduce the risk of overdriving screws and fasteners.
Robust build quality
Long-lasting quality components, fully covered thanks to the comprehensive support provided by Festool Service.
Control and power
Thanks to the extremely powerful, brushless, and therefore long-lasting, latest generation EC-TEC motor with three speed levels, and T-mode specifically for self-tapping screws.
Ergonomic and safe
Kickback-free hammer mechanism drives the fastener rather than spinning the drill around the screw thus protecting your wrist.
Tool-free 1/4" holder, integrated bit storage, optimum LED illumination of the work area, and belt clip for attachment on both sides.
- 18 volt
- 3 speeds: 0-1200, 0-2000, and 0-3200 RPM; and T-Mode: 0-3200, lowering to 750 RPM
- Maximum 4500 BPM hammer strokes in 3rd gear
- 180.00 Newton-metres (1593.18 inch-pounds) maximum torque
- 132 x 227 x 84 millimetres (5.2 x 8.94 x 3.3 inches) without battery
- 1/4 inch hex drive
- 1.5 kilograms (3.3 pounds) with lithium-ion battery
HKC Track Saw features
Bring the tool to the material and make straight cuts every time quickly and repeatably at any angle with the Festool HKC 55. The FSK Guide Rails with integrated angle stops is revolutionizing the construction site. Ideal for carpenters, stair builders, framers, and renovators, the HKC 55 is about speed and accuracy.
Convenient and Safe
Built with the user in mind, this saw features intuitive controls like a rapid blade guard retraction lever right next to the front knob, a built-in splitter and pinch-and-slide self-locking depth adjustment.
Use with guide rails for straight and effortless cuts
Attach the saw to an FSK Guide Rail for straight cuts up to 26 inches in length, or place it on the connectable FS Guide Rails for longer cuts.
FastFix blade change
Engage the FastFix blade change mechanism to lock out the power switch and lock the saw arbor for safe, quick, and easy blade changes with the hex key stored on board.
MMC Electronics enhance safety and control
The tool starts up smoothly, eliminating jolting and voltage spikes. Adjust the speed infinitely within the speed range to suit the material and application, and know that the pre-selected speed will remain constant even when load is applied. Built-in temperature control prevents overheating by switching the tool off when critical temperature is reached in order to prolong its lifespan.
Split depth scale
Easily set the depth of cut without calculations regardless of whether saw is being used on or off a guide rail.
- 14.4 to 18 volts
- 4500 RPM
- 0 to 50 degrees bevel
- 0 to 55 millimetres (0 to 2-1/8 inch) cut depth at 0 degrees
- 0 to 38 millimetres (0 to 1-1/2 inch) cut depth at 50 degrees
- 160 millimetre (6-1/4 inch) diameter saw blade
- 20 millimetre arbor size
- 1.8 millimetre (5/64 inch) kerf blade recommended, max 3.3 millimetres (3/32 inch)
- 3.4 kilograms (7.5 pounds) without battery pack
Scope of delivery
- TID 18 Impact Driver
- Systainer SYS3 M 187
- HKC 55 Track Saw
- Systainer SYS 4 T-Loc
- 2 - 18V Li 5.2 Ah Bluetooth Battery Packs
- TCL 6 Rapid Charger
- FSK 250 Guide Rail
- Extra 12 Tooth Blade
- Belt Clip
- Systainer SYS 1 T-Loc for accessories
- 30-Day Money Back Guarantee
- 3-Year Festool Service All-Inclusive Limited Warranty
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.