Festool TID 18 Impact Driver + PSC Carvex Jigsaw Combo Pack 205603

FestoolSKU: 205603

Price:
$909

Description

Whether cutting a laminate top with chip free precision or installing hardware in a tight space these tools have got you covered. The continuity a consistent battery platform provides comfort in knowing that you will have the power that you need to perform.

TID 18 Impact Driver features

This compact powerhouse offers an impressive service life thanks to its extremely robust hammer mechanism. The perfect combination of the new generation brushless EC-TEC motor and the battery pack ensures maximum performance, ergonomics and endurance.

Ergonomic design

Compact design enables you to work accurately and for longer without becoming tired, even in hard to reach areas.

Intelligent Power

The TID 18 cordless impact screwdriver offers extremely strong performance and ensures that work is tailored to the material with three speed settings. The clever T-mode detects the transition between sheet metal and wood and automatically adapts the speed.

Finesse

With a long trigger pull you can incrementally adjust the speed to reduce the risk of overdriving screws and fasteners.

Robust build quality

Long-lasting quality components, fully covered thanks to the comprehensive support provided by Festool Service.

Control and power

Thanks to the extremely powerful, brushless, and therefore long-lasting, latest generation EC-TEC motor with three speed levels, and T-mode specifically for self-tapping screws.

Ergonomic and safe

Kickback-free hammer mechanism drives the fastener rather than spinning the drill around the screw thus protecting your wrist.

User-friendly features

Tool-free 1/4" holder, integrated bit storage, optimum LED illumination of the work area, and belt clip for attachment on both sides.

Specifications

  • 18 volt
  • 3 speeds: 0-1200, 0-2000, and 0-3200 RPM; and T-Mode: 0-3200, lowering to 750 RPM
  • Maximum 4500 BPM hammer strokes in 3rd gear
  • 180.00 Newton-metres (1593.18 inch-pounds) maximum torque
  • 132 x 227 x 84 millimetres (5.2 x 8.94 x 3.3 inches) without battery
  • 1/4 inch hex drive
  • 1.5 kilograms (3.3 pounds) with lithium-ion battery

PSC 420 Carvex Jigsaw features

With improved blade visibility, an innovative lighting system, and modular base design, the Carvex is the best choice for the most demanding applications.

Unobscured view of the cut

A large, clear chip guard enhances dust collection while providing an undistorted view of the cut. It slides up out of the way if access to the blade area is required.

4 stroboscopic LED lights illuminate the cut

Synchronized to the speed of the blade, the jigsaw blade teeth appear stationary under the stroboscopic lights, so you can see exactly where you're cutting. A gravity sensor switches off the lights if the saw is inverted, and the lights can be set for steady on or steady off as well.

Splinterguard ensures splinter-free cuts

Even when crosscutting fir, or scribing thinly-veneered plywood or melamine and an aggressive blade, the zero-clearance splinterguard will ensure a splinter-free top surface.

Three-point blade guidance system keeps the blade true

If you think of a jigsaw as a crude tool not capable of making an accurate cut, you haven't seen what a Festool jigsaw can do. Adjustable carbide guides located just above the base plate prevent blade deflection and a back-up bearing keeps the blade from deflecting backwards.

Adjustable orbital action

For scrolling cuts and tight corners, switch the orbital action off. For faster and straighter cuts, choose from orbital settings 1, 2 and 3 which increase the aggressiveness of the saw by swinging the blade forward before the cut.

Extremely maximum blade speed for smoother cuts

Adjust the blade speed up to 3,800 strokes per minute for more cuts per inch, equalling faster and smoother cuts. Or turn down the speed for delicate cuts, or special materials.

Barrel grip allows multiple hand positions

Plant your off-hand on top, above the blade, and use your dominant hand to swing the tail of the saw around through curve cuts. Or just grip the barrel for one-handed cuts - the power switch is right there. Or flip the saw over and pull the saw towards you upside-down for a perfect view of the cut line.

Match the base to the application

The included base is cast square, so when installed, the saw is set to cut square - not 89.6 degrees.

Switch between flat base plates designed for wood, plastic, metal, or finished surface. Or swap to accessory baseplates (not included) for cutting straight lines with a guide rail, circles and arcs with a trammel, or left or right bevels.

MMC Electronics enhance safety and control

The tool starts up smoothly, eliminating jolting and voltage spikes. Adjust the speed infinitely within the speed range to suit the material and application, and know that the pre-selected speed will remain constant even when load is applied. Built-in temperature control prevents overheating by switching the tool off when critical temperature is reached in order to prolong its lifespan.

Specifications

  • 18 volts
  • 1,500 to 3,800 strokes per minute
  • 26 millimetre (1.02 inch) stroke length
  • 20 millimetre (3/4 inch) maximum cutting depth in nonferrous metals
  • 10 millimetre (3/8 inch) maximum cutting depth in steel
  • 120 millimetre (4-3/4 inch) maximum cutting depth in wood
  • 1.8 kilograms (4.0 pounds) without battery pack

Scope of delivery

  • TID 18 Impact Driver
  • Systainer SYS3 M 187
  • PSC 420 Carvex Jigsaw
  • Systainer SYS 3 T-Loc
  • 2x BP 18V Li-HighPower 4.0 Bluetooth Battery Packs
  • TCL 6 Rapid Charger
  • 25 Blade Assortment Pack / PSC
  • Belt Clip
  • Systainer SYS1 T-Loc for accessories
  • 30-Day Money Back Guarantee
  • 3-Year Festool Service All-Inclusive Limited Warranty

Payment & Security

American Express Diners Club Discover Mastercard Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping