{"title":"Festool-Compatible Accessories and Consumables","description":"\u003ch1\u003ePremium Third-Party Accessories for Festool Tools\u003c\/h1\u003e\n\u003cp\u003eUpgrade your Festool tools with our comprehensive range of high-quality third-party accessories. We offer a wide selection of Festool-compatible accessories designed to enhance precision, performance, and versatility in your woodworking projects. From replacement cutters and blades, durable clamps, reliable guides, and positioning aids - all the accessories work seamlessly with your Festool tools. \u003c\/p\u003e\n\u003cp\u003eWhether you're tackling a large-scale project or need precise tools for detailed work, these accessories provide the support and flexibility you need. With products designed by trusted manufacturers, these accessories not only improve your Festool tools but also deliver the reliability that woodworking professionals demand. \u003cbr\u003e\u003c\/p\u003e","products":[{"product_id":"tso-products-bigfoot-v2-0-support-61-434-a","title":"TSO BigFoot v2.0 Support for Festool DF 500\/DF 700 DBF-45 61-434 A","description":"\u003cp\u003eAttached to the bottom of a Festool Domino Joiner, BigFoot greatly increases the amount of registration area for mortising into the face of a surface.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eEasy installation\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eTwo bolts with star grip knobs allow easy and secure attachment to a Festool Domino DF 500 or DF 700 XL.\u003c\/p\u003e\n\u003ch5\u003eExcellent control and balance\u003c\/h5\u003e\n\u003cp\u003eBetween the large 125 x 94.5 millimetre (4.9 x 3.7 inch) reference surface and big T-handle, BigFoot provides stability and control for confidence in accurate mortising. The anodized aluminum body is stiff, accurately-machined, and durable.\u003c\/p\u003e\n\u003ch5\u003eFour parallax-free cursors for setup and alignment\u003c\/h5\u003e\n\u003cp\u003eAccurately position mortise centrelines along your layout lines.\u003c\/p\u003e\n\u003ch5\u003eHardware included for shop-built auxiliary fence or accessories\u003c\/h5\u003e\n\u003cp\u003eWork faster and with greater accuracy by attaching a shop-made auxiliary fence of any length (link to plans below)\u003c\/p\u003e\n\u003ch5\u003eConveniently stores inside tool's Systainer\u003c\/h5\u003e\n\u003cp\u003eBigFoot stores easily inside the DF 500 and DF 700 Systainers so it is always where it is needed.\u003c\/p\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBigFoot DBF-45 V2.0 Base System\u003c\/li\u003e\n\u003cli\u003e2x Comfort Grip Star Knobs\u003c\/li\u003e\n\u003cli\u003e4x M6x1.0 cone point set screws\u003c\/li\u003e\n\u003cli\u003e4x M6x1.0 flathead screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional resources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003ca href=\"https:\/\/tsoproducts.com\/content\/696-041.pdf\"\u003eHow to Make the Auxiliary Fence for Domino DF 500 (696-041 Rev. A)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003ca href=\"https:\/\/tsoproducts.com\/content\/696-051.pdf\"\u003eDimension Drawing for DF 500 Auxiliary Fence (696-051 Rev. A)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003ca href=\"https:\/\/tsoproducts.com\/content\/696-042.pdf\"\u003eHow to Make the Auxiliary Fence for Domino DF 700 XL (696-042 Rev. A)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003ca href=\"https:\/\/tsoproducts.com\/content\/696-052.pdf\"\u003eDimension Drawing for DF 700 XL Auxiliary Fence (696-052 Rev. A)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TSO Products","offers":[{"title":"Default Title","offer_id":32522161029167,"sku":"TSO-61-434 A","price":125.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/TSOBigFootv2.0SupportforFestoolDF500_DF700DBF-4561-434A.jpg?v=1686262857"},{"product_id":"amana-tool-non-ferrous-metal-and-plastic-circular-saw-blade-210-x-72t-tcg-with-30mm-bore-for-ts-75-md210-725","title":"Amana Non-Ferrous Metal and Plastic Circular Saw Blade 210 x 72T TCG with 30mm Bore MD210-725","description":"\u003cp\u003eMetals and hard plastics require specific blade geometry and a reduced RPM. Take advantage of the variable speed motor on your Festool track saws and cut composite and metal products quickly, cleanly, and accurately.\u003c\/p\u003e\n\u003cp\u003eWarning: do not use with a dust collection system as sparks can cause a fire.\u003c\/p\u003e\n\u003cp\u003eFor TS 75.\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e210 millimetres diameter\u003c\/li\u003e\n\u003cli\u003e72 teeth\u003c\/li\u003e\n\u003cli\u003e30 millimetre bore\u003c\/li\u003e\n\u003cli\u003e-5 degree hook angle\u003c\/li\u003e\n\u003cli\u003e0.098 inch (2.5 millimetre) kerf\u003c\/li\u003e\n\u003cli\u003e6,500 RPM maximum\u003c\/li\u003e\n\u003cli\u003eTriple-chip grind\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amana Tool","offers":[{"title":"Default Title","offer_id":37763061874885,"sku":"AM-MD210-725","price":149.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/products\/TS-75-Track-Saw-Blades-for-AluminumPlastic-Blade.jpg?v=1608695514"},{"product_id":"amana-tool-steel-circular-saw-blade-160mm-x-56t-tcg-with-20mm-bore-for-ts-55-stl160-56","title":"Amana Steel Circular Saw Blade 160mm x 56T TCG with 20mm Bore STL160-56","description":"\u003cdiv class=\"short-description\" data-mce-fragment=\"1\"\u003eFestool® \u0026amp; Other Track Saw Machine Compatible Saw Blades\u003c\/div\u003e\n\u003cdiv id=\"showdescc\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"description\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFestool® and other track saw machine compatible saw blades\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCarbide-tipped Festool and other track saw machine compatible saw blades are available for cutting aluminum, steel, building panels, laminates, melamine, soft plastics, solid surfaces and wood. Specifically designed to be compatible with your Festool machines. Available in 160mm, 210mm and 260mm diameters.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWarning: Not to be used with dust collection system.\u003cbr data-mce-fragment=\"1\"\u003eSparks from material could ignite and cause fire in the \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003edust collection unit!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Amana Tool","offers":[{"title":"Default Title","offer_id":37707597807813,"sku":"AM-STL160-56","price":115.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/products\/stl-160-56.jpg?v=1611083685"},{"product_id":"amana-tool-steel-circular-saw-blade-210mm-x-36t-tcg-with-30mm-bore-for-ts-75-stl210-30","title":"Amana Steel Circular Saw Blade 210mm x 36T TCG with 30mm Bore STL210-30","description":"\u003cp\u003eCutting steel requires a special blade geometry and a reduced RPM. Take advantage of the variable speed motor on your Festool track saws and cut composite and metal products quickly, cleanly, and accurately.\u003c\/p\u003e\n\u003cp\u003eWarning: do not use with a dust collection system as sparks can cause a fire.\u003c\/p\u003e\n\u003cp\u003eFor TS 75.\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e210 millimetres diameter\u003c\/li\u003e\n\u003cli\u003e72 teeth\u003c\/li\u003e\n\u003cli\u003e30 millimetre bore\u003c\/li\u003e\n\u003cli\u003e0 degree hook angle\u003c\/li\u003e\n\u003cli\u003eTriple-chip grind\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amana Tool","offers":[{"title":"Default Title","offer_id":37763060662469,"sku":"AM-STL210-30","price":168.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/products\/TS-75-Track-Saw-Blades-for-Steel-Blade_6bf31740-bc7e-4fb4-9385-5f64482e628f.jpg?v=1608695564"},{"product_id":"tso-products-doublegroove-close-fit-small-dogs-mft-system-compatible-package-2-61-409-a","title":"TSO 20mm Chamfer Dogs MFT System Compatible 61-488","description":"\u003cp\u003eSmall Dogs: Suitable for a majority of bench dog positioning applications, projecting 10mm (0.39 in) above the worktop.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eEasy to install or remove\u003c\/h5\u003e\n\u003cp\u003eChamfered edges allow easy insertion, and grooves around the collar allow a better grip for easier removal.\u003c\/p\u003e\n\u003ch5\u003e\u003cbr\u003e\u003c\/h5\u003e\n\u003ch5\u003eAccurate by design\u003c\/h5\u003e\n\u003cp\u003eA small undercut under the collar guarantees the dog can stand at 90 degrees to the work surface even if the dog holes aren't free of tearout.\u003c\/p\u003e\n\u003ch5\u003eSystem compatible\u003c\/h5\u003e\n\u003cp\u003eLock down the dogs with an M8x1.25 male knob such as the knobs included with a set of Festool Clamping Elements or TSO's own SpeedKnobs.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e19.98 millimetres diameter\u003c\/li\u003e\n\u003cli\u003e10.4 millimetre high collar\u003c\/li\u003e\n\u003cli\u003e17.5 millimetres below the collar\u003c\/li\u003e\n\u003cli\u003e6061-T6 aluminum\u003c\/li\u003e\n\u003cli\u003eClear anodized\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x DoubleGroove 20mm Close Fit Small Bench Dogs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TSO Products","offers":[{"title":"Default Title","offer_id":37797575884997,"sku":"TSO-61-488","price":26.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/Chamfer-Dogs-21__77867.jpg?v=1780942074"},{"product_id":"amana-tool-4mm-cutter-for-df-500-316020","title":"Amana 4mm Cutter for DF 500 316020","description":"\u003cp\u003eReplacement solid carbide 2-flute cutter for Festool DF 500 Domino Joiner.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 millimetres cutting diameter\u003c\/li\u003e\n\u003cli\u003e11 millimetres cutting length\u003c\/li\u003e\n\u003cli\u003e38 millimetres overall length\u003c\/li\u003e\n\u003cli\u003eM6 x 0.75 thread\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amana Tool","offers":[{"title":"Default Title","offer_id":38146218066117,"sku":"AM-316020","price":54.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/products\/AmanaTool4mmSolidCarbideDominoBitforDF500.jpg?v=1613700001"},{"product_id":"amana-tool-5mm-cutter-for-df-500-316022","title":"Amana 5mm Cutter for DF 500 316022","description":"\u003cp\u003eReplacement carbide tipped 2-flute cutter for Festool DF 500 Domino Joiner.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e5 millimetres cutting diameter\u003c\/li\u003e\n\u003cli\u003e20 millimetres cutting length\u003c\/li\u003e\n\u003cli\u003e49 millimetres overall length\u003c\/li\u003e\n\u003cli\u003eM6 x 0.75 thread\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amana Tool","offers":[{"title":"Default Title","offer_id":38146218131653,"sku":"AM-316022","price":47.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/products\/AmanaTool5mmDominoBitforDF500.jpg?v=1613699966"},{"product_id":"amana-tool-6mm-cutter-for-df-500-316024","title":"Amana 6mm Cutter for DF 500 316024","description":"\u003cp\u003eReplacement carbide tipped 2-flute cutter for Festool DF 500 Domino Joiner.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6 millimetres cutting diameter\u003c\/li\u003e\n\u003cli\u003e28 millimetres cutting length\u003c\/li\u003e\n\u003cli\u003e49 millimetres overall length\u003c\/li\u003e\n\u003cli\u003eM6 x 0.75 thread\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amana Tool","offers":[{"title":"Default Title","offer_id":38146218197189,"sku":"AM-316024","price":52.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/products\/AmanaTool6mmDominoBitforDF500.jpg?v=1613700176"},{"product_id":"amana-tool-8mm-cutter-for-df-500-316026","title":"Amana 8mm Cutter for DF 500 316026","description":"\u003cp\u003eReplacement carbide tipped 2-flute cutter for Festool DF 500 Domino Joiner.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e8 millimetres cutting diameter\u003c\/li\u003e\n\u003cli\u003e28 millimetres cutting length\u003c\/li\u003e\n\u003cli\u003e49 millimetres overall length\u003c\/li\u003e\n\u003cli\u003eM6 x 0.75 thread\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amana Tool","offers":[{"title":"Default Title","offer_id":38146218262725,"sku":"AM-316026","price":53.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/products\/AmanaTool8mmDominoBitforDF500.jpg?v=1613700261"},{"product_id":"amana-tool-10mm-cutter-for-df-500-316030","title":"Amana 10mm Cutter for DF 500 316030","description":"\u003cp\u003eReplacement carbide tipped 2-flute cutter for Festool DF 500 Domino Joiner.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e10 millimetres cutting diameter\u003c\/li\u003e\n\u003cli\u003e28 millimetres cutting length\u003c\/li\u003e\n\u003cli\u003e49 millimetres overall length\u003c\/li\u003e\n\u003cli\u003eM6 x 0.75 thread\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amana Tool","offers":[{"title":"Default Title","offer_id":38146218393797,"sku":"AM-316030","price":54.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/products\/AmanaTool10mmDominoBitforDF500.jpg?v=1613700353"},{"product_id":"amana-tool-8mm-cutter-for-df-700-316028","title":"Amana 8mm Cutter for DF 700 316028","description":"\u003cp\u003eReplacement carbide tipped 2-flute cutter for Festool DF 700 Domino Joiner.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e8 millimetres cutting diameter\u003c\/li\u003e\n\u003cli\u003e50 millimetres cutting length\u003c\/li\u003e\n\u003cli\u003e90 millimetres overall length\u003c\/li\u003e\n\u003cli\u003eM8 x 1 thread\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amana Tool","offers":[{"title":"Default Title","offer_id":38146218623173,"sku":"AM-316028","price":57.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/products\/AmanaTool8mmDominoBitforDF700.jpg?v=1613700496"},{"product_id":"amana-tool-10mm-cutter-for-df-700-316032","title":"Amana 10mm Cutter for DF 700 316032","description":"\u003cp\u003eReplacement carbide tipped 2-flute cutter for Festool DF 700 Domino Joiner.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e10 millimetres cutting diameter\u003c\/li\u003e\n\u003cli\u003e70 millimetres cutting length\u003c\/li\u003e\n\u003cli\u003e90 millimetres overall length\u003c\/li\u003e\n\u003cli\u003eM8 x 1 thread\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amana Tool","offers":[{"title":"Default Title","offer_id":38146219507909,"sku":"AM-316032","price":59.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/products\/AmanaTool10mmDominoBitforDF700.jpg?v=1613700561"},{"product_id":"amana-tool-12mm-cutter-for-df-700-316034","title":"Amana 12mm Cutter for DF 700 316034","description":"\u003cp\u003eReplacement carbide tipped 2-flute cutter for Festool DF 700 Domino Joiner.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12 millimetres cutting diameter\u003c\/li\u003e\n\u003cli\u003e70 millimetres cutting length\u003c\/li\u003e\n\u003cli\u003e90 millimetres overall length\u003c\/li\u003e\n\u003cli\u003eM8 x 1 thread\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amana Tool","offers":[{"title":"Default Title","offer_id":38146219573445,"sku":"AM-316034","price":62.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/products\/AmanaTool12mmDominoBitforDF700.jpg?v=1613700633"},{"product_id":"amana-tool-14mm-cutter-for-df-700-316036","title":"Amana 14mm Cutter for DF 700 316036","description":"\u003cp\u003eReplacement carbide tipped 2-flute cutter for Festool DF 700 Domino Joiner.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e14 millimetres cutting diameter\u003c\/li\u003e\n\u003cli\u003e70 millimetres cutting length\u003c\/li\u003e\n\u003cli\u003e90 millimetres overall length\u003c\/li\u003e\n\u003cli\u003eM8 x 1 thread\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amana Tool","offers":[{"title":"Default Title","offer_id":38146219638981,"sku":"AM-316036","price":63.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/products\/AmanaTool14mmDominoBitforDF700.jpg?v=1613701653"},{"product_id":"fastcap-tote-bag-for-guide-rails-76-1-2-inches-bf-76-5-trackbag","title":"FastCap Tote Bag for Guide Rails 76-1\/2 Inches BF-76.5-TRACKBAG","description":"This bag is perfect to protect and store guide rails from all major brands including Festool, Makita, DeWalt and Triton. The two large zippers provide easy access to the foam-lined interior which can hold up to five tracks. Comfortable handles make transporting easy.","brand":"FastCap","offers":[{"title":"Default Title","offer_id":39724617826501,"sku":"FC-BF-76.5-TRACKBAG","price":193.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/products\/FastcapBest76.5_TrackSawGuideRailBag.jpg?v=1627428456"},{"product_id":"tso-products-doublegroove-smart-connect-bench-dogs-61-436-a","title":"TSO DoubleGroove Smart Connect Bench Dogs 61-436 A","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eWhen it comes to layering or connecting work surfaces, rather than relying on clamps (expensive, imprecise, subject to getting knocked out of alignment) or traditional 20mm bench dogs with collars (which take up worktop space), Smart Connect Dogs used with our economical M8 Star Grip Knobs \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eor more premium M8 Speed Knobs\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e provide strong clamping action, precise registration and won't interfere with your work. With a body length of 28mm, Smart Connect Dogs are perfect for layering\/connecting two 15mm (or 5\/8\") thick plywood panels with knobs clamping from underneath.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eTo flush mount Smart Connect Dogs, you will need to chamfer the 20mm holes on your work surface. We recommend using a trim router with a quality 45˚ chamfer bit, as this allows you to perfectly adjust the depth of the chamfer to match these bench dogs.\u003c\/span\u003e\u003c\/p\u003e","brand":"TSO Products","offers":[{"title":"Default Title","offer_id":39897579421893,"sku":"TSO-61-436 A","price":25.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/products\/TSOProductsDoubleGroove20mmSmartConnectBenchDogs.jpg?v=1651167711"},{"product_id":"tso-products-star-grip-knobs-package-2-61-444","title":"TSO Star Grip Knobs 61-444","description":"\u003cp data-mce-fragment=\"1\"\u003eWhile TSO Products generally recommends the\u003cspan data-mce-fragment=\"1\"\u003e M8 SpeedKnobs\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eas the ultimate solution to secure 20 millimetre bench dogs, these M8 Star Grip Knobs are an economical alternative. Like the SpeedKnobs, they share the same M8x1.25 thread common in all DoubleGroove Dogs as well as most other bench dogs on the market. With a star shape and soft-touch plastic, they are easy to use even with gloves on.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eBecause the clamping surface area of these knobs is only 14mm, a pair of laser-cut Delrin washers are included that apply clamping pressure outwards to work on the 20 millimetre holes standard in many worktops.\u003c\/p\u003e","brand":"TSO Products","offers":[{"title":"Default Title","offer_id":39897656524997,"sku":"TSO-61-444","price":17.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/products\/M8_Star_Grip_Knobs_with_Washers__03295.1605842964.jpg?v=1622646625"},{"product_id":"tso-products-mtr-18-precision-system-triangle-set-61-461","title":"TSO MTR-18 Precision System Triangle Set 61-461","description":"\u003cp\u003eThe MTR-18 Triangle is a high-accuracy 18\" triangle suitable for layout, machine and MFT setup, assembly aid, and with its unique protractor feature , allows setup for precise mitres of any angle.\u003c\/p\u003e\n\u003ch5\u003eAll accessories included\u003c\/h5\u003e\n\u003cp\u003eThis set includes the MTR-18 Precision Triangle and all accessories for full capabilities.\u003c\/p\u003e\n\u003ch5\u003eAccurate to one thousandth of an inch over 18 inch length\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cp\u003eEach triangle is machined on high-precision CNC machining centres from precision aluminum tooling plate. Accuracy of 0.001 inch over the 18 inch length is confirmed with an automated coordinate measuring machine (CMM).\u003c\/p\u003e\n\u003ch5\u003eRepeatable accuracy\u003c\/h5\u003e\n\u003cp\u003eThe index pointer with parallax-free cursor and indexing pin provides quick and reliable setting of 0, 15, 22.5, 30 and 45 degree angles.\u003c\/p\u003e\n\u003ch5\u003eDetachable foot\u003c\/h5\u003e\n\u003cp\u003eWith the included full-length foot installed, the triangle can stand on its own, or be used to register off the edge of a workpiece. The foot is secured with stainless steel socket screws and a hex key. When the foot is not in use, the screws can be secured in tapped holes in the foot so they don't get lost.\u003c\/p\u003e\n\u003ch5\u003eEdge locating pins\u003c\/h5\u003e\n\u003cp\u003eThese two stainless steel pins provide an alternate to the detachable foot for referencing off the edge of a workpiece or table.\u003c\/p\u003e\n\u003ch5\u003eAccepts 20 millimetre bench dogs\u003c\/h5\u003e\n\u003cp\u003eEight 20 millimetre holes are machined on 96 millimetre centres for quick and accurate positioning of a workpiece on a Festool MFT or other work surface. (TSO DoubleGroove Medium Dogs have a leg length designed for clamping a triangle to a 20 millimetre thick work surface.)\u003c\/p\u003e\n\u003ch5\u003eGuide Rail Squaring Pins\u003c\/h5\u003e\n\u003cp\u003eThe 25 millimetre (1 inch) stainless steel pins facilitate squaring a guide rail to a fence or set of dogs, even when the rail is raised.\u003c\/p\u003e\n\u003ch5\u003eMetric on one side, imperial on the other\u003c\/h5\u003e\n\u003cp\u003eWhether working in inches or millimetres, the Precision Triangle has easy-to-read laser-engraved marks. With one on each side, extraneous measurements and visual noise is eliminated.\u003c\/p\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMTR-18 Precision Triangle\u003c\/li\u003e\n\u003cli\u003eMTR-18 Removable foot\u003c\/li\u003e\n\u003cli\u003e2x Edge locator pins\u003c\/li\u003e\n\u003cli\u003e2x Squaring\/connecting pins\u003c\/li\u003e\n\u003cli\u003e6x M4x0.7 socket head cap screw\u003c\/li\u003e\n\u003cli\u003e6x M6x10 \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003es\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eocket head cap screw\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBrass locking pin\u003c\/li\u003e\n\u003cli\u003eM6 Star-Grip Knob\u003c\/li\u003e\n\u003cli\u003eT-bolt\u003c\/li\u003e\n\u003cli\u003eIndexing pointer\u003c\/li\u003e\n\u003cli\u003e2x Standard Fit DoubleGroove Large Dogs\u003c\/li\u003e\n\u003cli\u003e2x Close Fit DoubleGroove Large Dogs\u003c\/li\u003e\n\u003cli\u003e2x M8 Speed Knobs\u003c\/li\u003e\n\u003cli\u003e2x Clamping Angles\u003c\/li\u003e\n\u003cli\u003e5 millimetre hex ball driver\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3 millimetre hex ball driver\u003c\/li\u003e\n\u003cli\u003eStorage tin\u003c\/li\u003e\n\u003cli\u003eCustom-fit Kaizen Foam insert for T-Loc and Sys3 Systainers\u003c\/li\u003e\n\u003cli\u003eTSO Name Plate for Systainer\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/tsoproducts.com\/content\/696-001_MTR-18_User_Guide.pdf\" title=\"user guide for MTR-18\"\u003eUser Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"TSO Products","offers":[{"title":"Default Title","offer_id":40668248080581,"sku":"TSO-61-461","price":604.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/products\/TSOProductsMTR-18PrecisionSystemTriangleSet.jpg?v=1632926980"},{"product_id":"tso-products-power-loc-bench-connector-dog-61-455","title":"TSO Power-Loc Bench Connector Dog 61-455","description":"\u003cp\u003eThese stainless steel dogs are used to connect anything with a 20 millimetre hole to a work surface with a 20 millimetre hole. \u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eClever design for simple use\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe connector dogs are inserted, tightened, loosened, and removed all from the top, with no need to reach below and no removable parts to lose.\u003c\/p\u003e\n\u003ch5\u003e30 to 40 millimetre clamping capacity\u003c\/h5\u003e\n\u003cp\u003eClamp materials with a combined thickness of 30 to 40 millimetres (1-3\/16 to 1-9\/16 inches). To avoid over-tightening, simply tighten the locking lug until it rests firmly against the bottom of the work surface. A 5 millimetre hex key (not included) is required to operate the dog.\u003c\/p\u003e\n\u003ch5\u003eFlush mountable\u003c\/h5\u003e\n\u003cp\u003eIf the holes of your top work surface are chamfered, the Power-Loc dogs can be flush-mounted. Use a router with 45 degree chamfer bit to produce the perfect chamfer (TSO does not recommend the UJK Chamfer tool for this procedure).\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"TSO Products","offers":[{"title":"Default Title","offer_id":42334835966173,"sku":"TSO-61-455","price":50.36,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/products\/TSOProductsPower-LocBenchConnectorDog1.jpg?v=1642709886"},{"product_id":"tso-products-mtr-x-precision-multifunction-triangle-set-61-539","title":"TSO Products MTR-X Precision Multifunction Triangle Set 61-539","description":"\u003cp\u003eThe MTR-X Precision Multifunction Triangle delivers accuracy and repeatability to layout, setup, cutting, and assembly tasks.\u003c\/p\u003e\n\u003ch2\u003eMTR-X Precision Multifunction Triangle delivers accuracy\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe 10 inch triangle is CNC machined from a single piece of cast aluminum tooling plate chosen for the greatest dimensional stability. Once machined, its accuracy is checked to be within 0.001 inch along the entire length by an automated coordinate measuring machine. Finally, the triangle is anodized for a wear resistant and non-marring finish and angle graduations are laser engraved on both sides. The result is an easy-to-spot tool with a clear and precise scale.\u003c\/p\u003e\n\u003cp\u003eThe precision triangle on its own makes an ideal reference for setting up machinery such as mitre saws, mitre gauges, fences and more. By attaching the aluminum angles, the reference surface is extended and the Multifunction Triangle serves as a high-precision assembly square to hold assemblies at 90 degrees for joinery and glue-ups with a pair of clamps (clamps not included).\u003c\/p\u003e\n\u003ch2\u003eMultifunction Triangle allows quick and precise layout\u003c\/h2\u003e\n\u003cp\u003eFor 45 and 90 degree layout, spin in a pair of index pins into the threaded holes and slide them up to the edge of your stock and create your layout with a pencil, awl or knife. If you need to create lines between 45 and 90 degrees, attach the dogs and pointer with parallax-free viewport, set it to the angle you need and create your layout.\u003c\/p\u003e\n\u003ch2\u003eAttach the MTR-X to a guide rail for repeatable crosscuts and mitres\u003c\/h2\u003e\n\u003cp\u003eThe included guide rail adapter allows the MTR-X Precision Multifunction Triangle to attach directly to the guide rail so you can bring it to the workpiece for accurate cuts from 45 to 90 degrees. It attaches to Festool, Makita, Powertec and Kreg Accu-Cut System.\u003c\/p\u003e\n\u003ch2\u003eDogs allow MTR-X Precision Multifunction Triangle to work with MFT\u003c\/h2\u003e\n\u003cp\u003eThe Multifunction Triangle has a variety of uses on a MFT or similar work surface, too. The 20mm holes machined into the triangle on 96mm centres, plus 20mm arc allow the MTR-X triangle to be installed on any worktop with that hole pattern, such as Festool's MFT. This makes it fast and easy to set 45 and 90 degree angles, and allows other angles to be quickly and precisely set.\u003c\/p\u003e\n\u003cp\u003eUse it to align the MFT's fence, and a guide rail (even in a raised position) with the long index pins, or use the MTR-X on its own to position your workpiece relative to the guide rail.\u003c\/p\u003e\n\u003ch3\u003eMTR-X Precision Multifunction Triangle Set scope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMTR-X Precision Multifunction Triangle\u003c\/li\u003e\n\u003cli\u003ePointer with parallax-free viewport\u003c\/li\u003e\n\u003cli\u003e2x Close Fit Chamfer Dogs\u003c\/li\u003e\n\u003cli\u003eGuide rail adapter\u003c\/li\u003e\n\u003cli\u003e2x M8 knob assemblies\u003c\/li\u003e\n\u003cli\u003e2x M6 screws\u003c\/li\u003e\n\u003cli\u003e2x M6 short index pins\u003c\/li\u003e\n\u003cli\u003e2x M6 long index pins\u003c\/li\u003e\n\u003cli\u003e2x 6 inch (152mm) clamping angles\u003c\/li\u003e\n\u003cli\u003e3mm hex wrench\u003c\/li\u003e\n\u003cli\u003eSmall parts tin\u003c\/li\u003e\n\u003cli\u003eFoam Systainer insert\u003c\/li\u003e\n\u003cli\u003eSystainer card\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TSO Products","offers":[{"title":"Default Title","offer_id":43535070986461,"sku":"TSO-61-539","price":409.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/TSO_Products_MTR-X_Precision_Multifunction_Triangle_Set_61-539.jpg?v=1698439017"},{"product_id":"tso-products-mft-aligned-guide-rail-support-upgrade-kit-61-494","title":"TSO Products MFT Aligned Guide Rail Support Upgrade Kit 61-494","description":"\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/E0scl2EkzYA\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eTSO Products MFT Aligned Guide Rail Support Upgrade Kit includes precision machined aluminum components with a pair of lock knobs to improve the reliability in Festool's MFT\/3 guide rail supports which are prone to deflection. They can easily move out of square - especially when adjusting for various thicknesses of workpieces - so frequent checking with an accurate square is necessary for accurate work.\u003c\/p\u003e\n\u003cp\u003eThe MFT Aligned Guide Rail Support Upgrade Kit includes two precision-machined brackets made from 6061-T6 aluminum to guide Festool's sliding metal bracket for height adjustment. It is secured with two locking knobs, significantly reducing deflection and likelihood that it will move out of square.\u003c\/p\u003e\n\u003cp\u003eAlso included in the kit is a precision aluminum guide rail insert that slides into the bottom T-slot of the guide rail and accepts the key in the top of the front MFT bracket. This part is more resistant to wear than the guide rail and \u003cmeta charset=\"utf-8\"\u003ereduces lateral play.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA 3 and 5 millimetre hex driver are required for assembly but not included. Not compatible with MFT 1080 or MFT 800.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/O2VlSXYXD08\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch3\u003eTSO Products MFT Aligned Guide Rail Support Upgrade Kit 61-494 \u003cmeta charset=\"utf-8\"\u003escope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x MFT Aligned support plates\u003c\/li\u003e\n\u003cli\u003e2x MFT Aligned feather keys\u003c\/li\u003e\n\u003cli\u003e4x Comfort Grip knobs\u003c\/li\u003e\n\u003cli\u003eGuide rail insert\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TSO Products","offers":[{"title":"Default Title","offer_id":43723161698525,"sku":"TSO-61-494","price":214.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/products\/TSOProductsMFTAlignedGuideRailSupportUpgradeKit61-494_1e4a79ec-22ff-4e45-ab22-192202f52cc7.jpg?v=1676681090"},{"product_id":"tso-products-guide-rail-adapter-for-precision-triangles-61-507","title":"TSO Products Guide Rail Adapter for Precision Triangles 61-525","description":"\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/-O8rcWxswGg\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eTSO Products Guide Rail Adapter for Precision Triangles connects a TSO MTR-18 or PTR-18 Precision Triangle to a guide rail, making it into a large, precision guide rail square. The Guide Rail Adapter is compatible with guide rails made by Festool, Makita, Kreg, and Powertec.\u003c\/p\u003e\n\u003ch2\u003eInstallation of TSO Products Guide Rail Adapter for Precision Triangles\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eFirst, bolt the Guide Rail Adapter to the triangle using the threaded accessory mounting holes in the face of the precision triangle. Loosen the two hex screws so the torpedo nut can be slid into the upwards-facing T-slot of the guide rail. Position the precision triangle on the guide rail and tighten the two clamping screws to complete the connection\u003c\/p\u003e\n\u003ch3\u003eTSO Products Guide Rail Adapter for Precision Triangles scope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGuide Rail Adapter\u003c\/li\u003e\n\u003cli\u003eTorpedo nut with keystone alignment profile\u003c\/li\u003e\n\u003cli\u003e2x M6 x 1.0 hex screws\u003c\/li\u003e\n\u003cli\u003e2x M5 x 0.8 flat head socket cap screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TSO Products","offers":[{"title":"Default Title","offer_id":43723161731293,"sku":"TSO-61-525","price":62.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/TSO_Products_Guide_Rail_Adapter_for_Precision_Triangles_61-525.jpg?v=1698430690"},{"product_id":"fastcap-fastenon-100-pc-pack-fastenon-100-pc-pack","title":"FastCap Fastenon 6 x 38mm Self-Clamping Tenons","description":"\u003cdiv class=\"flex flex-grow flex-col max-w-full\"\u003e\n\u003cdiv class=\"min-h-[20px] text-message flex flex-col items-start whitespace-pre-wrap break-words [.text-message+\u0026amp;]:mt-5 overflow-x-auto gap-3\" dir=\"auto\" data-message-id=\"9725e3dc-3740-4753-862e-e01a49f27a0e\" data-message-author-role=\"assistant\"\u003e\n\u003cdiv class=\"markdown prose w-full break-words dark:prose-invert light\"\u003e\n\u003cp\u003e\u003ciframe width=\"1200\" height=\"675\" src=\"https:\/\/www.youtube.com\/embed\/onfoo2WhhdU\" title=\"FASTenon Intro\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eIntroducing the FASTenon by FastCap, a revolutionary solution for effortlessly pulling joints together without clamps. This innovative product features barbs that securely bite into your materials, firmly holding your workpieces in place. Simply apply a bit of glue inside each joint to achieve even greater strength and durability.\u003c\/p\u003e\n\u003cp\u003eWhether you're a woodworking enthusiast or a professional carpenter, the FASTenon is your go-to tool for seamless assembly and alignment of components. Experience a new level of efficiency and precision in your projects. FastCap FASTenon will change the way you build.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 82, 87);\"\u003eFastcap Fastenon 6 x 38mm Self-Clamping Tenons scope of delivery\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e100 pieces Fastcap Fastenon Self-Clamping Tenons (\u003cmeta charset=\"utf-8\"\u003e6 x 38mm) \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FastCap","offers":[{"title":"Default Title","offer_id":44246659727581,"sku":"FC-FASTENON 100 PC","price":40.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/Fastcap_Fastenon_6x38mm_Self-Clamping_Tenons_1.jpg?v=1715636650"},{"product_id":"fastcap-domino-sled","title":"FastCap Domino Sled *","description":"\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/c4n1a4mVJO4?si=0eBDidu1bx3yi2Ux\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eAchieve precise, consistent joinery with the FastCap Domino Sled, designed exclusively for use with the Festool DF 500 Q Domino Joiner. Crafted from solid aircraft grade aluminum, this Sled ensures fast, accurate, and repeatable measurements for cutting joinery holes, simplifying the creation of flawless floating tenon joints.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: rgb(0, 82, 87);\" data-mce-style=\"color: rgb(0, 82, 87);\"\u003eFastCap Domino Sled: \u003cmeta charset=\"utf-8\"\u003eEfficient Operation and Easy Set Up\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cmeta charset=\"utf-8\"\u003eThe Domino Sled provides precise joinery with simple steps set-up. To begin using the Domino Sled determine wood thickness, choose appropriate Domino bit and set the plunge depth and cut width.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eSecure the fence to your workpiece with clamps and mark out the desired locations for mortise cuts using the FastCap Stop center line. Install as many stops as you need.\u003c\/p\u003e\n\u003ch2 class=\"MsoNormal\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan style=\"color: rgb(0, 82, 87);\" data-mce-style=\"color: rgb(0, 82, 87);\"\u003ePrecise Alignment and \u003cmeta charset=\"utf-8\"\u003eRepeatability of Mortises with FastCap Domino Sled\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cmeta charset=\"utf-8\"\u003eThe Domino Sled can be set flush to the edge, ensuring perfect alignment for your cuts. Utilize its green tabs to locate the edge of the wood board accurately. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe adjustable locking tabs allow the Domino Sled to be used seamlessly with different track and fence brands, ensuring a secure fit with your Festool DF 500 Q-Set Domino Joiner.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 82, 87);\" data-mce-style=\"color: rgb(0, 82, 87);\"\u003eFastCap Domino Sled scope of delivery:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eClear case\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCustom cut Kaizen Foam\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 Aluminum Sled\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3 Sled Stops\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 Allen Key\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eExtra Sled Stops sold separately.\u003c\/span\u003e\u003c\/p\u003e","brand":"FastCap","offers":[{"title":"Domino Sled","offer_id":45179700379869,"sku":"FC-DOMINO SLED","price":189.0,"currency_code":"CAD","in_stock":true},{"title":"Extra Sled Stop","offer_id":45179700412637,"sku":"FC-SLED STOP","price":8.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/FastCap_Domino_Sled_1.jpg?v=1715621237"},{"product_id":"fastcap-domino-mortise-markers-mortise","title":"FastCap Domino Mortise Markers MORTISE *","description":"\u003cp class=\"p1\"\u003e\u003cstrong\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/6LXt2Yc8pHw?si=N9KlSjXZG0pPFu84\" height=\"315\" width=\"560\" allowfullscreen=\"\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003cstrong\u003eAvailable by pre-order until August 7th at noon. Delivery expected for September 2024.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eFastCap Domino Mortise Marker is an ideal tool for precisely marking the centre location when cutting mating mortises.\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan style=\"color: rgb(0, 82, 87);\" data-mce-style=\"color: rgb(0, 82, 87);\"\u003eSimple and Accurate Layout with FastCap Domino Mortise Markers \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003eSimply insert the marker into a pre-cut mortise on one piece, align it with where you want the joint to be on the other piece, and gently tap it with a hammer. This action will create a cross-hair mark on the mating piece, which you can then extend with a pencil line, ensuring accurate and swift joint cutting every time.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eFor harder woods, you can enhance visibility by using an inked stamp pad with the Mortise Marker, enabling effortless transfer of your centre mark.\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan style=\"color: rgb(0, 82, 87);\" data-mce-style=\"color: rgb(0, 82, 87);\"\u003ePrecision Mortise Markers for Festool Domino Joiners DF 500 Q-Plus and DF 700 XL\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003eThe regular Mortise Marker set is perfect for the Festool Domino Joiner DF 500 Q and includes 2 of each size: 4, 5, 6, 8 and 10mm.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe Mortise Marker XL is made for the Festool Domino XL DF 700 Joiner and includes 2 of each size: 8, 10, 12 and 14mm.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eAdditionally, the Mortise Markers are offered in pairs with two of any size: 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, and 14mm.\u003c\/p\u003e","brand":"FastCap","offers":[{"title":"Pair of 5mm","offer_id":45179700445405,"sku":"FC-MORTISE 5MM","price":35.1,"currency_code":"CAD","in_stock":true},{"title":"Pair of 6mm","offer_id":45179700478173,"sku":"FC-MORTISE 6MM","price":35.1,"currency_code":"CAD","in_stock":true},{"title":"Pair of 12mm","offer_id":45179700510941,"sku":"FC-MORTISE 12MM","price":43.88,"currency_code":"CAD","in_stock":true},{"title":"Pair of 14mm","offer_id":45179700543709,"sku":"FC-MORTISE 14MM","price":43.88,"currency_code":"CAD","in_stock":true},{"title":"XL Set (8\/10\/12\/14mm)","offer_id":45179700576477,"sku":"FC-MORTISE MARK XL","price":110.25,"currency_code":"CAD","in_stock":true},{"title":"Regular Set (4\/5\/6\/8\/10mm)","offer_id":45179700609245,"sku":"FC-MORTISE MARKER","price":110.25,"currency_code":"CAD","in_stock":true},{"title":"Pair of 4mm","offer_id":45179700642013,"sku":"FC-MORTISE 4MM","price":35.1,"currency_code":"CAD","in_stock":true},{"title":"Pair of 8mm","offer_id":45179700674781,"sku":"FC-MORTISE 8MM","price":35.1,"currency_code":"CAD","in_stock":true},{"title":"Pair of 10mm","offer_id":45179700707549,"sku":"FC-MORTISE 10MM","price":35.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/FastCap_Domino_Mortise_Markers_MORTISE_1.jpg?v=1715618557"},{"product_id":"tso-products-tool-shelf-for-mft-3-61-610","title":"TSO Products Tool Shelf for MFT\/3 61-610","description":"\u003cp data-start=\"41\" data-end=\"343\" class=\"\"\u003eThe TSO Products Tool Shelf for MFT\/3 is the perfect assistant to keep your tools within reach, yet out of the way. Designed for the Festool MFT\/3, this shelf helps you stay organized and efficient by providing a dedicated spot for your most-used tools, without cluttering your workspace.\u003c\/p\u003e\n\u003cp data-start=\"345\" data-end=\"637\" class=\"\"\u003eIt can be assembled to sit either outside or under your MFT\/3, giving you the flexibility to choose the setup that best suits your workflow. Whether you're looking to maximize your bench space or simply want a smarter way to store your tools, this shelf is a practical and effective solution.\u003c\/p\u003e","brand":"TSO Products","offers":[{"title":"Default Title","offer_id":46416241393885,"sku":"TSO-61-610","price":201.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/TSO_Products_Tool_Shelf_for_MFT3_61-610_1.jpg?v=1746632566"},{"product_id":"tso-products-extended-rip-fence-for-csc-sys-50-eb-cordless-table-saw-61-620","title":"TSO Products Extended Rip Fence for CSC SYS 50 EB Cordless Table Saw 61-620","description":"\u003cp data-start=\"153\" data-end=\"741\" class=\"\"\u003eThe TSO Products Extended Rip Fence for the Festool CSC SYS 50 Cordless Table Saw enhances support and control when working with longer materials, helping you make cleaner, more accurate cuts.\u003c\/p\u003e\n\u003cp data-start=\"153\" data-end=\"741\" class=\"\"\u003eDesigned for precision woodworking, this 1 metre (39-3\/8 inch) long rip fence is twice as long as the fence supplied with the Festool CSC SYS 50 and provides increased stability and confidence, especially during rip cuts where consistent alignment is essential. Installing is as simple as sliding off the stock fence sliding the Extended Rip Fence on, and tightening the clamping knobs. There is no need to adjust the measuring scale on the saw, as the Extended Rip Fence is equal in width to the original.\u003c\/p\u003e\n\u003cp data-start=\"153\" data-end=\"741\" class=\"\"\u003eThe system includes two stock support brackets and two specially designed adapters that allow for seamless integration with JessEm Clear Cut FLEX Stock Guides (sold separately).\u003c\/p\u003e\n\u003ch3 data-start=\"153\" data-end=\"741\"\u003eTSO Products Extended Rip Fence for CSC SYS 50 EB Cordless Table Saw 61-620 specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6063-T5 aluminum\u003c\/li\u003e\n\u003cli\u003eClear anodizing with acid etched surface\u003c\/li\u003e\n\u003cli\u003e1,000 millimetres (39-3\/8 inches) long\u003c\/li\u003e\n\u003cli\u003e49.16 millimetres (1.935 inches) high\u003c\/li\u003e\n\u003cli\u003e16.05 millimetres (0.632 inches) wide, at top\u003c\/li\u003e\n\u003cli\u003e10.24 millimetres (0.403 inches) wide, at bottom\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TSO Products","offers":[{"title":"Default Title","offer_id":46416241426653,"sku":"TSO-61-620","price":201.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/TSO_Products_Extended_Rip_Fence_for_CSC_SYS_50_EB_Cordless_Table_Saw_61-620_ripping.jpg?v=1748370998"},{"product_id":"tso-products-extended-miter-fence-and-supporting-stop-for-csc-sys-50-61-574","title":"TSO Products Extended Miter Fence and Supporting Stop for CSC SYS 50 61-574","description":"\u003cp\u003eEnhance the capability of your Festool CSC SYS 50 cordless table saw with the TSO Products Extended Miter Fence and Supporting Stop, a thoughtfully engineered upgrade that brings greater accuracy, versatility, and efficiency to your workflow.\u003c\/p\u003e\n\u003cp\u003eBuilt to integrate seamlessly with the Festool table saw mitre gauge, this extended fence features a pair of robust aluminum fence sections, each measuring 300 millimetres in length and standing 48.5 millimetres tall, offering dependable support for repeatable cross-cuts and improved control over your workpiece.\u003c\/p\u003e\n\u003ch2\u003eTSO Products Extended Miter Fence: versatile and expandable for maximum support\u003c\/h2\u003e\n\u003cp\u003eWith two T-slots on the back and one on the top, the fence allows for easy attachment of accessories such as clamps, stops, and supports, instantly expanding your saw’s potential. For larger work, the two fence sections can be connected to create a single extended fence, providing a longer, more stable reference edge when handling oversized material.\u003c\/p\u003e\n\u003ch2\u003eDual-function stop block for precise, repeatable cuts\u003c\/h2\u003e\n\u003cp\u003eAt the heart of the system is a versatile stop block that does more than just set repeatable cut lengths. With a quick adjustment, it can be repositioned to serve as a supporting rest, helping to stabilize larger pieces during cutting operations. This flexibility makes it easier to achieve clean, consistent results while improving safety and workflow.\u003c\/p\u003e\n\u003ch2\u003eSmart storage meets seamless integration: meet TSO's Extended Miter Fence and Supporting Stop for CSC SYS 50\u003c\/h2\u003e\n\u003cp\u003eWhen the job is complete, the entire system stores neatly within the Festool Systainer, and with an available foam insert, you can keep everything organized and protected alongside other essential components such as JessEm Clear Cut stock guides. Whether you're breaking down panels or producing batch parts with precision, this upgrade turns your CSC SYS 50 into a smarter, more capable machine, ready to deliver accurate, repeatable cuts with minimal setup.\u003c\/p\u003e\n\u003ch3\u003eTSO Products Extended Miter Fence and Supporting Stop for CSC SYS 50 61-574 specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIndividual Fence Overall Length: 11.81 inches (300 millimetres)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndividual Fence Overall Height: 1.94 \u003cmeta charset=\"utf-8\"\u003einch (48.5 \u003cmeta charset=\"utf-8\"\u003emillimetres)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndividual Fence Overall Thickness (Excluding Top T-Slot): 0.40 \u003cmeta charset=\"utf-8\"\u003einch (10.2 \u003cmeta charset=\"utf-8\"\u003emillimetres)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndividual Fence Overall Thickness (Including Top T-Slot): 0.63 \u003cmeta charset=\"utf-8\"\u003einch (16 \u003cmeta charset=\"utf-8\"\u003emillimetres)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFence T-Slots Width: 0.48 \u003cmeta charset=\"utf-8\"\u003einch (12.2 \u003cmeta charset=\"utf-8\"\u003emillimetres)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003cli\u003eFence T-Slots Depth: 0.25 \u003cmeta charset=\"utf-8\"\u003einch (6.4 \u003cmeta charset=\"utf-8\"\u003emillimetres)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003cli\u003eFence T-Slots Opening Width: 0.33 \u003cmeta charset=\"utf-8\"\u003einch (8.4 \u003cmeta charset=\"utf-8\"\u003emillimetres)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTSO Products Extended Miter Fence and Supporting Stop for CSC SYS 50 61-574 scope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x Mitre Fences\u003c\/li\u003e\n\u003cli\u003e4x M6 Screws\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x Fence Connectors\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x Stop Block and Support\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x M6 Hammer Nut\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x M6 Knob\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TSO Products","offers":[{"title":"Default Title","offer_id":46416241459421,"sku":"TSO-61-574","price":100.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/TSO_Products_Extended_Miter_Fence_and_Supporting_Stop_for_CSC_SYS_50_61-574_1.jpg?v=1746654730"},{"product_id":"tso-products-20-inch-parallel-guide-system-gen-2-61-648","title":"TSO Products 20 Inch Parallel Guide System Gen 2 61-648","description":"\u003cp\u003eThe TSO Products Parallel Guide System has long been trusted by woodworkers who want more than just straight cuts from their track saws. By turning a track saw into a repeatable cutting system, it makes accurate, identical rips possible time after time. With the Gen 2 version, TSO has reimagined the system from the ground up, guided by feedback from real users, to make setup faster, operation easier, and results even more precise.\u003c\/p\u003e\n\u003cp\u003eThis compact 20 inch kit makes repeatable rip cuts up to 20 inches wide fast and accurate. The short tracks make it the ideal setup for use with the TSO Products Narrow Stock Pro accessory to make rips narrower than the guide rail.\u003c\/p\u003e\n\u003cp\u003eWith improved stops, upgraded connectors, and a fully modular design, it’s built to deliver accuracy and efficiency in any woodworking project — whether you’re building furniture, cabinets, or anything else that demands dependable precision.\u003c\/p\u003e\n\u003ch2\u003eTSO Products 20 Inch Parallel Guide System Gen 2: universal fit with quick-connect speed\u003c\/h2\u003e\n\u003cp\u003eThe connectors are the critical link between your guides and the guide rail, and the new Drop-Loc Connector combines strength with convenience. Simply press the button, tilt it into the guide rail’s T-track at any point, release, and it locks instantly. There’s no need to feed it from the end of the rail or work around hose deflectors and other accessories. When you’re ready to adjust, press the button again to slide it along the rail or tilt it out for removal. Once in place, the connector is fully captured in the T-track, so it stays put even if you lift or move the rail. Each kit includes a pair of connectors, and they’re universally compatible with Festool, Makita, Milwaukee, Kreg, Ridgid, Powertec, and Wen guide rails.\u003c\/p\u003e\n\u003ch2\u003eTSO 20 Inch Parallel Guide System: engineered for rock-solid accuracy\u003c\/h2\u003e\n\u003cp\u003eThe Flip Stop Pro is the most stable and precise stop TSO has ever built. Its dual-arm, no-deflection design holds steady even when you’re registering a full sheet of plywood. A longer contact arm ensures solid engagement with your workpiece, while a precisely machined recess at the pointer eliminates parallax, so you can read measurements accurately from any angle. Setup is simple with the fine-thread calibration system — just set it once, and it remains locked cut after cut. Like its predecessor, it glides smoothly when you move it yet stays firmly planted when in use. It’s also backward compatible with earlier PGS tracks, making it a seamless upgrade.\u003c\/p\u003e\n\u003ch2\u003eRepeatable precision, faster setup, and unmatched capacity\u003c\/h2\u003e\n\u003cp\u003eThe 20 inch Parallel Guide System Gen 2 delivers predictable accuracy with solid aluminum guides, high-contrast dual-dimension scales, and the Flip Stop Pro. Setup takes only seconds thanks to the universal guides and Drop-Loc Connectors, so you can focus on building instead of fiddling with your tools. With this kit you can expand it later with additional track lengths or accessories like the Narrow Stock Pro, Guide Rail Square Connector, or extra Flip Stop Pros.\u003c\/p\u003e\n\u003cp\u003eDesigned for speed, engineered for accuracy, and built to expand as your needs grow, the TSO Products 20 Inch Parallel Guide System Gen 2 61-648 is the ultimate upgrade for your track saw workflow.\u003c\/p\u003e\n\u003ch3\u003eTSO Products 20 Inch Parallel Guide System Gen 2 61-648 scope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e20 inch Parallel Guide Tracks \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x Flip Stop Pros\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x Drop-Loc Connectors\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x 3 millimetres Hex Driver\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TSO Products","offers":[{"title":"Default Title","offer_id":46684424667357,"sku":"TSO-61-648","price":440.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/TSO_Products_20_Inch_Parallel_Guide_System_Gen2_61-648_1.jpg?v=1759424177"},{"product_id":"tso-products-30-inch-50-inch-parallel-guide-system-gen-2-61-650","title":"TSO Products 30 Inch + 50 Inch Parallel Guide System Gen 2 61-650","description":"\u003cp\u003eThe TSO Products Parallel Guide System has long been trusted by woodworkers who want more than just straight cuts from their track saws. By turning a track saw into a repeatable cutting system, it makes accurate, identical rips possible time after time. With the Gen 2 version, TSO has reimagined the system from the ground up, guided by feedback from real users, to make setup faster, operation easier, and results even more precise.\u003c\/p\u003e\n\u003cp\u003eThis 30 inch + 50 inch kit gives you the full capacity to handle everything from narrow rips to oversized sheet goods. With improved stops, upgraded connectors, and a fully modular design, it’s built to deliver accuracy and efficiency in any woodworking project — whether you’re building furniture, cabinets, or anything else that demands dependable precision.\u003c\/p\u003e\n\u003ch2\u003eTSO Products 30 Inch + 50 Inch Parallel Guide System Gen 2: universal fit with quick-connect speed\u003c\/h2\u003e\n\u003cp\u003eThe connectors are the critical link between your guides and the guide rail, and the new Drop-Loc Connector combines strength with convenience. Simply press the button, tilt it into the guide rail’s T-track at any point, release, and it locks instantly. There’s no need to feed it from the end of the rail or work around hose deflectors and other accessories. When you’re ready to adjust, press the button again to slide it along the rail or tilt it out for removal. Once in place, the connector is fully captured in the T-track, so it stays put even if you lift or move the rail. Each kit includes a pair of connectors, and they’re universally compatible with Festool, Makita, Milwaukee, Kreg, Ridgid, Powertec, and Wen guide rails.\u003c\/p\u003e\n\u003ch2\u003eTSO 30 + 50 Inch Parallel Guide System: engineered for rock-solid accuracy\u003c\/h2\u003e\n\u003cp\u003eThe Flip Stop Pro is the most stable and precise stop TSO has ever built. Its dual-arm, no-deflection design holds steady even when you’re registering a full sheet of plywood. A longer contact arm ensures solid engagement with your workpiece, while a precisely machined recess at the pointer eliminates parallax, so you can read measurements accurately from any angle. Setup is simple with the fine-thread calibration system — just set it once, and it remains locked cut after cut. Like its predecessor, it glides smoothly when you move it yet stays firmly planted when in use. It’s also backward compatible with earlier PGS tracks, making it a seamless upgrade.\u003c\/p\u003e\n\u003ch2\u003eRepeatable precision, faster setup, and unmatched capacity\u003c\/h2\u003e\n\u003cp\u003eThe 30 inch + 50 inch Parallel Guide System Gen 2 delivers predictable accuracy with solid aluminum guides, high-contrast dual-dimension scales, and the Flip Stop Pro. Setup takes only seconds thanks to the universal guides and Drop-Loc Connectors, so you can focus on building instead of fiddling with your tools.\u003c\/p\u003e\n\u003cp\u003eWith this kit, you can rip up to 50 inches wide, giving you the capacity to tackle large projects with ease, or switch to the more agile 30 inch tracks when maximum capacity isn't needed. And because the system is modular, you can expand it later with additional track lengths or accessories like the Narrow Stock Pro, Guide Rail Square Connector, or extra Flip Stop Pros.\u003c\/p\u003e\n\u003cp\u003eDesigned for speed, engineered for accuracy, and built to expand as your needs grow, the TSO Products 30 Inch + 50 Inch Parallel Guide System Gen 2 61-650 is the ultimate upgrade for your track saw workflow.\u003c\/p\u003e\n\u003ch3\u003eTSO Products 30 Inch + 50 Inch Parallel Guide System Gen 2 61-650 scope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e30+50 inch Parallel Guide Tracks \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x Flip Stop Pros\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x Drop-Loc Connectors\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x 3 millimetres Hex Driver\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TSO Products","offers":[{"title":"Default Title","offer_id":46684424700125,"sku":"TSO-61-650","price":629.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/TSO_Products_30_50_Inch_Parallel_Guide_System_Gen2_61-650_1.jpg?v=1759420979"},{"product_id":"tso-products-30-inch-parallel-guide-system-gen-2-61-649","title":"TSO Products 30 Inch Parallel Guide System Gen 2 61-649","description":"\u003cp\u003eThe TSO Products Parallel Guide System has long been trusted by woodworkers who want more than just straight cuts from their track saws. By turning a track saw into a repeatable cutting system, it makes accurate, identical rips possible time after time. With the Gen 2 version, TSO has reimagined the system from the ground up, guided by feedback from real users, to make setup faster, operation easier, and results even more precise.\u003c\/p\u003e\n\u003cp\u003eThis 30 inch kit gives you the full capacity to handle everything from narrow rips to oversized sheet goods. With improved stops, upgraded connectors, and a fully modular design, it’s built to deliver accuracy and efficiency in any woodworking project — whether you’re building furniture, cabinets, or anything else that demands dependable precision.\u003c\/p\u003e\n\u003ch2\u003eTSO Products 30 Inch Parallel Guide System Gen 2: universal fit with quick-connect speed\u003c\/h2\u003e\n\u003cp\u003eThe connectors are the critical link between your guides and the guide rail, and the new Drop-Loc Connector combines strength with convenience. Simply press the button, tilt it into the guide rail’s T-track at any point, release, and it locks instantly. There’s no need to feed it from the end of the rail or work around hose deflectors and other accessories. When you’re ready to adjust, press the button again to slide it along the rail or tilt it out for removal. Once in place, the connector is fully captured in the T-track, so it stays put even if you lift or move the rail. Each kit includes a pair of connectors, and they’re universally compatible with Festool, Makita, Milwaukee, Kreg, Ridgid, Powertec, and Wen guide rails.\u003c\/p\u003e\n\u003ch2\u003eTSO 30 Inch Parallel Guide System: engineered for rock-solid accuracy\u003c\/h2\u003e\n\u003cp\u003eThe Flip Stop Pro is the most stable and precise stop TSO has ever built. Its dual-arm, no-deflection design holds steady even when you’re registering a full sheet of plywood. A longer contact arm ensures solid engagement with your workpiece, while a precisely machined recess at the pointer eliminates parallax, so you can read measurements accurately from any angle. Setup is simple with the fine-thread calibration system — just set it once, and it remains locked cut after cut. Like its predecessor, it glides smoothly when you move it yet stays firmly planted when in use. It’s also backward compatible with earlier PGS tracks, making it a seamless upgrade.\u003c\/p\u003e\n\u003ch2\u003eRepeatable precision, faster setup, and unmatched capacity\u003c\/h2\u003e\n\u003cp\u003eThe 30 inch Parallel Guide System Gen 2 delivers predictable accuracy with solid aluminum guides, high-contrast dual-dimension scales, and the Flip Stop Pro. Setup takes only seconds thanks to the universal guides and Drop-Loc Connectors, so you can focus on building instead of fiddling with your tools. With this kit you can expand it later with additional track lengths or accessories like the Narrow Stock Pro, Guide Rail Square Connector, or extra Flip Stop Pros.\u003c\/p\u003e\n\u003cp\u003eDesigned for speed, engineered for accuracy, and built to expand as your needs grow, the TSO Products 30 Inch Parallel Guide System Gen 2 is the ultimate upgrade for your track saw workflow.\u003c\/p\u003e\n\u003ch3\u003eTSO Products 30 Inch Parallel Guide System Gen 2 61-649 scope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e30 inch Parallel Guide Tracks \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x Flip Stop Pros\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x Drop-Loc Connectors\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x 3 millimetres Hex Driver\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TSO Products","offers":[{"title":"Default Title","offer_id":46684424732893,"sku":"TSO-61-649","price":466.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/TSO_Products_30_Inch_Parallel_Guide_System_Gen2_61-649_1.jpg?v=1759425019"},{"product_id":"tso-products-systainer-foam-insert-for-parallel-guide-system-gen-2-accessories-61-695","title":"TSO Products Systainer Foam Insert for Parallel Guide System Gen 2 Accessories 61-695","description":"\u003cp data-start=\"205\" data-end=\"625\"\u003eThe Parallel Guide System Gen 2 is all about faster setup and smoother workflows, and keeping your accessories organized is key to making that possible. For use with 30 and 50 inch Parallel Guide Gen 2 Systems, this custom foam insert provides a dedicated home for your smaller system components so you can deploy your setup quickly without searching for parts. Designed to fit neatly inside a \u003cmeta charset=\"utf-8\"\u003e\u003ca href=\"https:\/\/www.ultimatetools.ca\/products\/festool-sys3-systainer-boxes-with-lid-compartment-m-size-57734?variant=43701598748893\"\u003eSystainer SYS3 M 137\u003c\/a\u003e, it keeps everything protected, organized, and instantly ready for use.\u003c\/p\u003e\n\u003ch2\u003ePrecision-cut Kaizen foam for protection and visibility\u003c\/h2\u003e\n\u003cp data-start=\"627\" data-end=\"948\"\u003eMachined from layered Kaizen foam with a black top and red core, the insert cushions and protects each piece while providing instant visual confirmation that all parts are accounted for. Its durable construction makes it equally useful in the shop or on the go, ensuring your kit remains secure at all times.\u003c\/p\u003e\n\u003ch2 data-end=\"1104\" data-start=\"729\"\u003eTSO Products Systainer Foam Insert keeps your accessories organized and ready\u003c\/h2\u003e\n\u003cp data-start=\"950\" data-end=\"1366\"\u003eThe insert is made to house all of the Parallel Guide System Gen 2 components except the 30 and 50 inch Parallel Guide Tracks \u003ca href=\"https:\/\/www.ultimatetools.ca\/products\/tso-products-systainer-foam-insert-for-20-inch-parallel-guide-system-gen-2-61-694\"\u003e(click here for the foam insert for the 20 inch Parallel Guide System)\u003c\/a\u003e. It includes precision-cut storage for one Guide Rail Square Connector, one Narrow Stop Pro with space for two Guide Rail Supports, one GRC-12 Self-Aligning Guide Rail Connector, one Hex Driver, and two Flip Stop Pros. A Systainer Identification Card is also included for quick and easy labelling.\u003c\/p\u003e\n\u003cp data-start=\"1368\" data-end=\"1490\"\u003eWith this insert, your Parallel Guide System accessories stay organized, protected, and always ready when you need them.\u003c\/p\u003e\n\u003cp data-start=\"1368\" data-end=\"1490\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cem\u003ePlease note: Systainer, and all Parallel Guide System components shown in the pictures are sold separately. \u003c\/em\u003e\u003c\/p\u003e","brand":"TSO Products","offers":[{"title":"Default Title","offer_id":46684425060573,"sku":"TSO-61-695","price":57.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/TSO_Products_Systainer_Foam_Insert_for_Parallel_Guide_System_Gen2_Accessories_61-695_1.jpg?v=1759356092"},{"product_id":"tso-products-systainer-foam-insert-for-20-inch-parallel-guide-system-gen-2-61-694","title":"TSO Products Systainer Foam Insert for 20 Inch Parallel Guide System Gen 2 61-694","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe TSO Products Systainer Foam Insert for the 20-inch Parallel Guide System Gen 2 is the perfect way to keep your PGS system protected, organized, and ready for action. Designed to fit neatly inside a \u003ca href=\"https:\/\/www.ultimatetools.ca\/products\/festool-sys3-systainer-boxes-with-lid-compartment-m-size-57734?variant=43701598748893\"\u003eSystainer SYS3 M 137\u003c\/a\u003e, this custom insert ensures every component of your Parallel Guide System has a dedicated place, offering protection during storage and transport without sacrificing quick accessibility.\u003c\/p\u003e\n\u003ch2\u003ePrecision-cut Kaizen foam for protection and visibility\u003c\/h2\u003e\n\u003cp data-start=\"729\" data-end=\"1104\"\u003eCNC-machined from multi-layered Kaizen foam with a black top and a red inner core, the insert cushions and protects your components while also making it easy to see what’s stored and what might be missing at a glance. Its durable construction provides long-lasting protection, whether you’re transporting your kit to the jobsite or keeping it secure in the shop.\u003c\/p\u003e\n\u003ch2 data-start=\"729\" data-end=\"1104\"\u003eTSO Products Systainer Foam Insert keeps your 20-inch Parallel Guide System organized and ready\u003c\/h2\u003e\n\u003cp data-start=\"1106\" data-end=\"1479\"\u003eThe foam insert is precision-cut to hold all of the components from your 20-inch Parallel Guide System Gen 2 kit, including two 20-inch Parallel Guide Tracks with Drop-Loc Connectors attached, two Flip Stop Pros, and one 3-millimetre Hex Driver. A Systainer Identification Card is also included, designed to slide into the front or side card holders of your Systainer for quick reference.\u003c\/p\u003e\n\u003cp data-start=\"1481\" data-end=\"1590\"\u003eWith this insert, your Parallel Guide System stays organized, protected, and always ready when you need it.\u003c\/p\u003e\n\u003cp data-start=\"1481\" data-end=\"1590\"\u003e\u003cem\u003ePlease note: all the components from the 20-inch Parallel Guide System Gen 2 kit shown in the pictures are sold separately.\u003c\/em\u003e\u003c\/p\u003e","brand":"TSO Products","offers":[{"title":"Default Title","offer_id":46684425093341,"sku":"TSO-61-694","price":57.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/TSO_Products_Systainer_Foam_Insert_for_20_Inch_Parallel_Guide_System_Gen2_61-694_1.jpg?v=1759355225"},{"product_id":"ujk-tools-parf-guide-system-mkii-104779","title":"UJK Tools Parf Guide System MKII 104779","description":"\u003cdiv id=\"ProductIntroDescription-template--21167624290652__main\" class=\"product-intro-description\"\u003e\n\u003cp class=\"product-intro-description__text\"\u003eThe UJK Parf MkII Guide System combines accuracy, speed, and simplicity for superior woodworking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"h3\"\u003eKey Features\u003c\/h3\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAward winning precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMake a benchtop or cutting boards in under 30 minutes with 20mm accurate holes \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGuarantees 45° and 90° cuts using Pythagoras' principles\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdapts to any workspace and simplifies project setup\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnsures accurate holes, right angles, perfect mitres, and repeatable cuts for custom work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe award winning UJK Parf Mk II Guide System. In just 30 minutes, make custom benchtops, portable cutting boards or workstations, or MFT (multifunction table) tops with 20mm hole patterns based on Pythagoras' theorem. Use with UJK Super Dogs, a guide rail, and a track saw for flawless 45° and 90° cuts. Create tighter grids with 32mm or 46mm spacing for endless cutting, assembling, and clamping options. The UJK Parf Guide System MkII is a British made innovation, honoured with the prestigious King’s Award for Enterprise in 2023 for its exceptional contribution to the woodworking industry.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UJK Tools","offers":[{"title":"Default Title","offer_id":47705908052189,"sku":"UJK-104779","price":395.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/104779_xl.webp?v=1774625447"},{"product_id":"ujk-tools-50mm-guide-dogs-105310-2x","title":"UJK Tools 50mm Guide Dogs 2x 105310","description":"\u003cdiv id=\"ProductIntroDescription-template--21167624290652__main\" class=\"product-intro-description\"\u003e\n\u003cp class=\"product-intro-description__text\"\u003eUJK 50mm Guide Dogs - your reliable benchtop companions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"h3\"\u003eKey Features\u003c\/h3\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to work with the UJK MFT Workbench and other 20mm hole systems\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSold in pairs to maintain uniformity across your work\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eManufactured to exacting standards for a perfect fit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStable reference point for routing, sawing, and more.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBritish Made, Stainless steel construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eIntroducing the UJK 50mm Guide Dogs, the perfect pair to guide your projects with unparalleled accuracy. These CNC precision-machined, guide dogs are designed to fit perfectly into any 20mm hole system or MFT workbench or top, they offer stable support, ensuring that your workpiece remains firmly in place during the most intricate tasks. Easy to use, The UJK 50mm Guide Dogs are designed for quick insertion and removal, enhancing your efficiency. British made from high-quality stainless steel, they are not only durable but also corrosion-resistant, ensuring long-lasting performance in any workshop environment.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UJK Tools","offers":[{"title":"Default Title","offer_id":47705908117725,"sku":"UJK-105310","price":31.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/105310_xl.webp?v=1774625348"},{"product_id":"ujk-tools-parf-protractor-112023","title":"UJK Tools Parf Protractor 112023","description":"\u003cdiv id=\"ProductIntroDescription-template--21167624290652__main\" class=\"product-intro-description\"\u003e\n\u003cp class=\"product-intro-description__text\"\u003eUJK Parf Protractor - the ultimate addition to the UJK Parf Mk II Guide System\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"h3\"\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eUse seamlessly with the UJK Parf MKII Guide System\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCreate 20mm dog holes and cuts at angles from 0-90°\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDelivers precise angle measurements in 0.5° increments\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEvery cut and angle is as exact as possible\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnsures repeatable, accurate cuts\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBritish Made\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eManufactured from aluminium with high-precision laser engraving\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eIntroducing the UJK Parf Protractor, the ultimate addition to the UJK Parf MKII Guide System, designed for precision woodworking. This ingenious tool allows you to create a series of 20mm dog holes, ranging from 0-45° and 45-90°, with precise angle measurements in 0.5° increments. Varied marking holes provide the most precise angle at each point, eliminating any chance of cumulative error, and ensures accurate cuts. Proudly British made at UJK HQ, the Parf Protractor guarantees accuracy and reliability.\u003c\/p\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAngle Range\u003c\/th\u003e\n\u003ctd\u003e0° to 90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"UJK Tools","offers":[{"title":"Default Title","offer_id":47705908084957,"sku":"UJK-112023","price":103.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/112023.webp?v=1774625280"},{"product_id":"ujk-tools-parf-plus-guide-system-112024","title":"UJK Tools Parf Plus Guide System 112024","description":"\u003cdiv id=\"ProductIntroDescription-template--21167624290652__main\" class=\"product-intro-description\"\u003e\n\u003cp class=\"product-intro-description__text\"\u003eUJK Parf Plus Guide System, the ultimate combination of precision and efficiency.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"h3\"\u003eKey Features\u003c\/h3\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eCombines UJK Parf MkII Guide system and UJK Parf Protractor\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild a portable workstation, MFT top, or cutting boards in 30 minutes or less\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eProduces precise 20mm holes and perfect 0° and 45° cuts and 45° to 90° cuts\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUJK Parf Protractor allows for precise angle measurements in 0.5° increments\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatible with 20mm dog fittings and accessories\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnsures accuracy and eliminates cumulative error\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBased on Pythagoras' theorem for infallible accuracy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUJK Parf Protractor made from stainless steel with high-precision laser engraving.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBritish Made\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUJK Parf Mk II Guide System, Winner of The King’s Award for Enterprise in Innovation 2023\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe UJK Parf Plus Guide System combines the award-winning UJK Parf Mk II Guide System with the innovative UJK Parf Protractor. Designed and made in Britain, this system based on Pythagoras theorem allows you to create custom benchtops with 20mm accurate holes from 0-90° angles in just 30 minutes. Whether on-site or in the workshop, achieving accurate holes, right angles, perfect mitres, and repeatable cuts. The UJK Parf Protractor works seamlessly with the Mk II Guide System, offering precise angle measurements in 0.5° increments and creating 20mm dog holes from 0-45° and 45-90°.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UJK Tools","offers":[{"title":"Default Title","offer_id":47705908150493,"sku":"UJK-112024","price":439.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/112024.webp?v=1774624523"},{"product_id":"ujk-tools-12mm-guide-dogs-pups-105311-2x","title":"UJK Tools 12mm Guide Dogs (Pups) 2x 105311","description":"\u003ch3 class=\"h3\"\u003eKey Features\u003c\/h3\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eSupplied as a pair\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLow profile, 12mm projection, 20mm diameter\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCNC machined from 303-grade stainless steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePrecise fit in 20mm holes of multifunction workbenches\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatible with the Festool MFT\/3 (with chamfered 20mm holes)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFully compatible with other multifunction bench accessories\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePerfect for fixing other items or jigs with corresponding 20mm holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eSupplied as a pair, these UJK Guide Dogs fit exactly into the 20mm holes of the UJK multifunction workbench. They are compatible with the Festool MFT\/3 tabletop and similar grid tables with chamfered 20mm holes.\u003c\/p\u003e\n\u003cp\u003eCNC machined from 303-grade stainless steel, the Guide Dog has a 12mm projection above the tabletop. The lower profile makes the Dogs ideal for situations where a taller dog would cause an obstruction. At 20mm diameter, it is fully compatible with many other multifunction bench accessories.\u003c\/p\u003e\n\u003cp\u003eThe stop collar fits into a chamfer around the dog hole, providing a register that guarantees the dog sits perpendicular to the work surface and ensures a flush fit at the base. A UJK Chamfer Cutter is available to modify tables with plain holes, or you can use a router with a bevel cutter to create a slight chamfer.\u003c\/p\u003e\n\u003cp\u003eWhen used in pairs the precision fit of the Dog is perfect for fixing other items or jigs with corresponding 20mm holes.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UJK Tools","offers":[{"title":"Default Title","offer_id":47705908543709,"sku":"UJK-105311","price":20.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/105311_xl_8f997bae-b26d-4d3b-b29e-985db26cd3fd.webp?v=1774624455"},{"product_id":"ujk-tools-parf-super-dog-104302","title":"UJK Tools Parf Super Dog 104302","description":"\u003cdiv id=\"ProductIntroDescription-template--21167624290652__main\" class=\"product-intro-description\"\u003e\n\u003cp class=\"product-intro-description__text\"\u003eTransform your workbench into a precision station with the UJK Super Dog.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"h3\"\u003eKey Features\u003c\/h3\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eComes with three interchangeable collars for varied applications\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCan be inserted from beneath the bench for a low profile dog\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCNC machined and precision engineered from 303 stainless steel for durability and exact fit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFits perfectly with 20mm holes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLock into place with a simple twist for unwavering accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe UJK Super Dog, the ultimate bench accessory for woodworkers seeking precision and versatility. Designed to fit snugly into 20mm holes, this innovative tool is compatible with the UJK Technology Multifunction Workbench, Festool MFT\/3, and other tables with 20mm holes. The stop collar ensures a precise 90° alignment of the dog to the UJK worktop, while maintaining a flush fit, by slotting into the chamfer around the dog hole. Its rock-solid locking mechanism with a simple twist of the top changes fine tolerance into zero tolerances and ensures accuracy for every cut, making it an indispensable part of your toolkit. British made showcasing the quality of British manufacturing.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UJK Tools","offers":[{"title":"Default Title","offer_id":47705908576477,"sku":"UJK-104302","price":41.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/104302_xl.webp?v=1774624317"},{"product_id":"ujk-tools-parf-long-super-dog-104719","title":"UJK Tools Parf Long Super Dog 104719","description":"\u003cdiv id=\"ProductIntroDescription-template--21167624290652__main\" class=\"product-intro-description\"\u003e\n\u003cp class=\"product-intro-description__text\"\u003eUnlock New Carpentry Possibilities\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"h3\"\u003eKey Features\u003c\/h3\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003e120mm projection for cutting large timbers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximises plunge saw’s depth of cut\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePrecision CNC machined from 303 stainless steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLong lasting accuracy and durability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSolid fit with a simple twist of the knurled top\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatible with 20mm holes on multifunction style workbenches and UJK Parf Guide System Grids.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncludes 2 interchangeable collar; 10mm tall register collar with a 25mm diameter exactly mimics the original bench dog\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe UJK Long Super Dog is a game-changer for your MFT style workbench. Removing the limitations of standard bench dogs and allowing you to cut much thicker timber with precision. With a 120mm projection, it enables you to take full advantage of your plunge saw’s depth of cut, making it perfect for cutting large timbers or trenching. Simply twist the knurled top for a rock-solid fit in 20mm holes, compatible with UJK workbenches, Festool MFT\/3, and self-built grid tables. A UJK chamfer cutter is available for non-chamfered tables. We recommend using the Dog Rail Clip with the Long Super Dogs.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UJK Tools","offers":[{"title":"Default Title","offer_id":47705908609245,"sku":"UJK-104719","price":52.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/104719_xl_f2c71b5f-b332-4894-bce8-6b84f3a1a571.webp?v=1774624161"},{"product_id":"ujk-tools-expanding-20mm-dog-set-108818","title":"UJK Tools Expanding 20mm Dog Set 108818","description":"\u003cdiv id=\"ProductIntroDescription-template--21167624290652__main\" class=\"product-intro-description\"\u003e\n\u003cp class=\"product-intro-description__text\"\u003eUJK Expanding 20mm Dog Set, twist and lock for unmatched stability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"h3\"\u003eKey Features\u003c\/h3\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eTwist of the top locks the dog in place\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUnique design allows for a tight fit in any 20mm hole, ensuring stability and precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSimple to insert and remove, enhancing your workflow efficiency\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupplied in a Mini Systainer: 2 of each\n\u003cul\u003e\n\u003cli\u003e10mm\u003c\/li\u003e\n\u003cli\u003e30mm\u003c\/li\u003e\n\u003cli\u003e40mm\u003c\/li\u003e\n\u003cli\u003e60mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eBritish Made\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThese compact 'pups' offer all the benefits of the UJK Super Dogs but smaller! With an innovative and simple twist-lock mechanism, eliminating any play and ensuring zero movement for the most precise tasks. Compatible with any 20mm hole system, including the UJK Multifunction workbench. Paired with the UJK Chamfer Ring for flawless 90° alignment. British made from stainless steel, these dogs have exacting accuracy and durability.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UJK Tools","offers":[{"title":"Default Title","offer_id":47705908642013,"sku":"UJK-108818","price":205.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/108818.webp?v=1774624122"},{"product_id":"ujk-tools-expanding-20mm-dogs-10mm-height-108819-2x","title":"UJK Tools Expanding 20mm Dogs 10mm height 108819","description":"\u003ch3 class=\"h3\"\u003eKey Features\u003c\/h3\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eFor benches and tables with 20mm dog holes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSimple twist of the top locks dog in place\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCNC machined from 303 stainless steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLocks rock solid, guaranteed accuracy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair, 10mm projection above bench surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eUJK Expanding Dogs are effectively shorter and slightly simpler versions of the UJK Super Dog. They feature the same locking mechanism as the UJK Super Dog . CNC machined from 303 stainless steel in our own workshops in the UK, the UJK Expanding Dogs maintain our high quality for precision engineered products. These dogs are engineered to fit into a 20mm dog hole. They 'Expand' the possibilities and uses on any workbench with 20mm dog holes. They’re fully compatible with the UJK Multifunction Workbench and Festool Multi-functional MFT\/3 Table. The locking mechanism is designed to take up any slight tolerance in the dog hole itself. A simple twist of the top of the dog changes fine tolerance into zero tolerance and locks it firmly in place. Once locked, the Expanding Dog will sit perfectly still, without any wobble or movement. Supplied with the unique chafer ring, this feature ensures the dog sits in the hole and provides a register ensuring the dog sits exactly at 90° to the work surface when locked in place, whilst still allowing for a flush fit, the chamfer ring also stops the dog falling through the hole before it's adjusted. A UJK Chamfer Cutter is available for other non chamfered tables, or you can use a router with a bevel cutter to create a slight chamfer. These Expanding dogs are supplied as a pair and have a 10mm projection above the surface of your bench.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UJK Tools","offers":[{"title":"Default Title","offer_id":47705909559517,"sku":"UJK-108819","price":61.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/108819_xl_be8d4c6d-04f6-4e07-a5b4-5eb2d4fb59bc.webp?v=1774624079"},{"product_id":"ujk-tools-expanding-20mm-dogs-30mm-height-108820-2x","title":"UJK Tools Expanding 20mm Dogs 30mm height 108820","description":"\u003ch3 class=\"h3\"\u003eKey Features\u003c\/h3\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eFor benches and tables with 20mm dog holes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSimple twist of the top locks dog in place\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCNC machined from 303 stainless steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLocks rock solid, guaranteed accuracy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair, 30mm projection above bench surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eUJK Expanding Dogs are effectively shorter and slightly simpler versions of the UJK Super Dog. They feature the same locking mechanism as the UJK Super Dog. CNC machined from 303 stainless steel in our own workshops in the UK, the UJK Expanding Dogs maintain our high quality for precision engineered products. These dogs are engineered to fit into a 20mm dog hole. They ‘Expand’ the possibilities and uses on any workbench with 20mm dog holes. They’re fully compatible with the UJK Multifunction Workbench and Festool Multi-functional MFT\/3 Table. The locking mechanism is designed to take up any slight tolerance there might be in the dog hole itself. A simple twist of the top of the dog changes fine tolerance into zero tolerance and locks it firmly in place. Once locked the Expanding Dog will sit perfectly still, without any wobble or movement. Supplied with the unique chafer ring, this feature ensures the dog sits in the hole and provides a register ensuring the dog sits exactly at 90° to the work surface when locked in place, whilst still allowing for a flush fit, the chamfer ring also stops the dog falling through the hole before it's adjusted. A UJK Chamfer Cutter is available for other non chamfered tables, or you can use a router with a bevel cutter to create a slight chamfer. These Expanding dogs are supplied as a pair and have a 30mm projection above the surface of your bench.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UJK Tools","offers":[{"title":"Default Title","offer_id":47705909625053,"sku":"UJK-108820","price":66.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/108820_xl_6c1f21c0-e3a5-4426-8678-867b85073ec5.webp?v=1774624034"},{"product_id":"ujk-tools-expanding-20mm-dogs-40mm-height-108821-2x","title":"UJK Tools Expanding 20mm Dogs 40mm height 2x 108821","description":"\u003ch3 class=\"h3\"\u003eKey Features\u003c\/h3\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eFor benches and tables with 20mm dog holes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSimple twist of the top locks dog in place\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCNC machined from 303 stainless steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLocks rock solid, guaranteed accuracy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair, 40mm projection above bench surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eUJK Expanding Dogs are effectively shorter and slightly simpler versions of the UJK Super Dog. They feature the same locking mechanism as the UJK Super Dog. CNC machined from 303 stainless steel in our own workshops in the UK, the UJK Expanding Dogs maintain our high quality for precision engineered products. These dogs are engineered to fit into a 20mm dog hole. They 'Expand' the possibilities and uses on any workbench with 20mm dog holes. They’re fully compatible with the UJK Multifunction Workbench and Festool Multi-functional MFT\/3 Table. The locking mechanism is designed to take up any slight tolerance there might be in the dog hole itself. A simple twist of the top of the dog changes fine tolerance into zero tolerance and locks it firmly in place. Once locked the Expanding Dog will sit perfectly still, without any wobble or movement. Supplied with the unique chafer ring, this feature ensures the dog sits in the hole and provides a register ensuring the dog sits exactly at 90° to the work surface when locked in place, whilst still allowing for a flush fit, the chamfer ring also stops the dog falling through the hole before it's adjusted. A UJK Chamfer Cutter is available for other non chamfered tables, or you can use a router with a bevel cutter to create a slight chamfer. These Expanding Dogs are supplied as a pair and have a 40mm projection above the surface of your bench.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UJK Tools","offers":[{"title":"Default Title","offer_id":47705909657821,"sku":"UJK-108821","price":69.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/108821_xl_f77fff06-3d6f-41be-8cc8-29387ebdfd18.webp?v=1774623958"},{"product_id":"ujk-tools-expanding-20mm-dogs-60mm-height-108822-2x","title":"UJK Tools Expanding 20mm Dogs 60mm height 2x 108822","description":"\u003ch3 class=\"h3\"\u003eKey Features\u003c\/h3\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eFor benches and tables with 20mm dog holes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSimple twist of the top locks dog in place\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCNC machined from 303 stainless steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLocks rock solid, guaranteed accuracy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair, 60mm projection above bench surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eUJK Expanding Dogs are effectively shorter and slightly simpler versions of the UJK Super Dog. They feature the same locking mechanism as the UJK Super Dog. CNC machined from 303 stainless steel in our own workshops in the UK, the UJK Expanding Dogs maintain our high quality for precision engineered products. These dogs are engineered to fit into a 20mm dog hole. They 'Expand' the possibilities and uses on any workbench with 20mm dog holes. They’re fully compatible with the UJK Multifunction Workbench and Festool Multi-functional MFT\/3 Table. The locking mechanism is designed to take up any slight tolerance there might be in the dog hole itself. A simple twist of the top of the dog changes fine tolerance into zero tolerance and locks it firmly in place. Once locked the Expanding Dog will sit perfectly still, without any wobble or movement. Supplied with the unique chamfer ring, this feature ensures the dog sits in the hole and provides a register ensuring the dog sits exactly at 90° to the work surface when locked in place, whilst still allowing for a flush fit, the chamfer ring also stops the dog falling through the hole before it's adjusted. A UJK Chamfer Cutter is available for other non chamfered tables, or you can use a router with a bevel cutter to create a slight chamfer. These Expanding dogs are supplied as a pair and have a 60mm projection above the surface of your bench.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UJK Tools","offers":[{"title":"Default Title","offer_id":47705909690589,"sku":"UJK-108822","price":73.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/108822_xl_45a7ae06-9084-4c1b-a27b-2ccf5271c203.webp?v=1774623855"},{"product_id":"ujk-tools-low-profile-dogs-6mm-113784-2x","title":"UJK Tools Low Profile Dogs 6mm 113784","description":"\u003ch3 class=\"h3\"\u003eKey Features\u003c\/h3\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e• For benches and tables with 20mm dog holes\u003cbr\u003e• Low profile, ideal for sanding, planing and thinner materials\u003cbr\u003e• Precision machined from Anodised aluminium\u003cbr\u003e• Supplied as a pair, 6mm projection above bench surface\u003c\/p\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThese UJK Low Profile Dogs grip your workpiece tight without getting in your way.\u003c\/p\u003e\n\u003cp\u003eEngineered for makers who demand precision and flexibility, the UJK Low Profile Dogs are the go-to solution for secure workholding on any 20mm hole bench system, whether it’s a UJK worktop, custom grid or Festool MFT. With just 6mm of projection, they’re ideal for sanding, planing and working with thinner stock where taller dogs would interfere.\u003c\/p\u003e\n\u003cp\u003eMachined from anodised aluminium, they're lightweight, corrosion-resistant and built to last. Supplied in pairs, they're ready to slot in and stay there.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UJK Tools","offers":[{"title":"Default Title","offer_id":47705909854429,"sku":"UJK-113784","price":31.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/113784.webp?v=1774623823"},{"product_id":"ujk-tools-low-profile-flat-faced-dogs-12mm-113785-2x","title":"UJK Tools Low Profile Flat Faced Dogs 12mm 2x 113785","description":"\u003ch3 class=\"h3\"\u003eKey Features\u003c\/h3\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eFor benches and tables with 20mm dog holes\u003c\/li\u003e\n\u003cli\u003eLow profile, ideal for sanding, planing and thinner materials\u003c\/li\u003e\n\u003cli\u003ePrecision machined from Anodised aluminium\u003c\/li\u003e\n\u003cli\u003eFlat-faced Dogs for extra grip \u0026amp; stability\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair, 12mm projection above bench surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThese dogs lock your workpiece with maximum surface grip and zero interference.\u003c\/p\u003e\n\u003cp\u003eDesigned for makers who need secure, unobtrusive workholding, the UJK Low Profile Flat-Faced Dogs are precision-machined from anodised aluminium and built for 20mm hole benches - UJK worktops, custom grids, or Festool MFT. With a 12mm projection and broad flat face, they offer enhanced stability for fine, accurate work without getting in the way. Supplied in pairs, they’re tough, lightweight and ready to become a staple in your workshop.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UJK Tools","offers":[{"title":"Default Title","offer_id":47705909887197,"sku":"UJK-113785","price":31.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/113785.webp?v=1774623775"},{"product_id":"ujk-tools-low-profile-dogs-8mm-113786-2x","title":"UJK Tools Low Profile Dogs 8mm 113786","description":"\u003ch3 class=\"h3\"\u003eKey Features\u003c\/h3\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e• For benches and tables with 20mm dog holes\u003cbr\u003e• Low profile, ideal for sanding, planing and thinner materials\u003cbr\u003e• Precision machined from Anodised aluminium\u003cbr\u003e• Supplied as a pair, 8mm projection above bench surface\u003c\/p\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThese UJK Low Profile Dogs grip your workpiece tight without getting in your way.\u003c\/p\u003e\n\u003cp\u003eEngineered for makers who demand precision and flexibility, the UJK Low Profile Dogs are the go-to solution for secure workholding on any 20mm hole bench system, whether it’s a UJK worktop, custom grid or Festool MFT. With just 8mm of projection, they’re ideal for sanding, planing and working with thinner stock where taller dogs would interfere.\u003c\/p\u003e\n\u003cp\u003eMachined from anodised aluminium, they're lightweight, corrosion-resistant and built to last. Supplied in pairs, they're ready to slot in and stay there.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UJK Tools","offers":[{"title":"Default Title","offer_id":47705909919965,"sku":"UJK-113786","price":31.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/113786.webp?v=1774623703"},{"product_id":"ujk-tools-low-profile-dogs-10mm-113787-2x","title":"UJK Tools Low Profile Dogs 10mm 113787","description":"\u003ch3 class=\"h3\"\u003eKey Features\u003c\/h3\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e• For benches and tables with 20mm dog holes\u003cbr\u003e• Low profile, ideal for sanding, planing and thinner materials\u003cbr\u003e• Precision machined from Anodised aluminium\u003cbr\u003e• Supplied as a pair, 10mm projection above bench surface\u003c\/p\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThese UJK Low Profile Dogs grip your workpiece tight without getting in your way.\u003c\/p\u003e\n\u003cp\u003eEngineered for makers who demand precision and flexibility, the UJK Low Profile Dogs are the go-to solution for secure workholding on any 20mm hole bench system, whether it’s a UJK worktop, custom grid or Festool MFT. With just 10mm of projection, they’re ideal for sanding, planing and working with thinner stock where taller dogs would interfere.\u003c\/p\u003e\n\u003cp\u003eMachined from anodised aluminium, they're lightweight, corrosion-resistant and built to last. Supplied in pairs, they're ready to slot in and stay there.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UJK Tools","offers":[{"title":"Default Title","offer_id":47705909952733,"sku":"UJK-113787","price":31.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/113787.webp?v=1774623620"},{"product_id":"ujk-tools-complete-set-of-8-low-profile-dogs-113788","title":"UJK Tools Complete Set of 8 Low Profile Dogs 113788","description":"\u003ch3 class=\"h3\"\u003eKey Features\u003c\/h3\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eFor benches and tables with 20mm dog holes\u003c\/li\u003e\n\u003cli\u003eSet of 8 pairs, 6mm, 8mm, 10mm projections and 12mm Flat Face dog\u003c\/li\u003e\n\u003cli\u003eLow profile, ideal for sanding, planing and thinner materials\u003c\/li\u003e\n\u003cli\u003ePrecision machined from Anodised aluminium\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThis versatile pack gives you the right dog for every job.\u003c\/p\u003e\n\u003cp\u003ePart of the trusted UJK Parf accessory range, this set of 8 Low Profile Dogs is your all-in-one solution for reliable workholding on any 20mm hole bench - UJK worktops, custom grids, or Festool MFT tables. With pairs in 6mm, 8mm, 10mm and flat-faced 12mm projections, you’ll have the perfect height and contact surface for sanding, planing, routing and working with thinner materials.\u003c\/p\u003e\n\u003cp\u003ePrecision machined from anodised aluminium, they’re tough, lightweight, and built to last. Whether you're chasing accuracy or speed, this set keeps your workpiece exactly where you want it.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UJK Tools","offers":[{"title":"Default Title","offer_id":47705910051037,"sku":"UJK-113788","price":86.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/0322\/files\/1113788.webp?v=1774623514"}],"url":"https:\/\/www.ultimatetools.ca\/collections\/festool-accessories-and-consumables.oembed?page=4","provider":"Ultimate Tools","version":"1.0","type":"link"}