Why a precision bench dog? If you look at the Festool and Walko work tables, you will notice the holes are set in a precise grid. With Qwas Dogs you can take advantage of that grid to make perfect cuts, whether cross cuts, rip cuts, or 45 degree cuts (Festool MFT only).
Qwas Dogs are great for holding a workpiece while sanding, sawing, planing, or glueing up a project. Anything that requires holding your workpiece still or requires a perfect 90 degree angle, Qwas Dogs will work.
2 pairs of Qwas Dogs allows you test the squareness of work pieces, squares, or help in glueing up your projects.
Qwas Dogs are sold as a matched pair. Each pair is inspected to assure diameters within .001 (1 thousandths) of an inch. Are you planning on using 2 pairs or more? All Qwas Dogs pairs are tested to be within 3 thousandths of an inch to each other (+.001, -002).
Qwas Dogs are designed to utilized the full depth of the holes for proper alignment. The small shoulders assures the dogs are aligned with the hole rather than inaccuracies in the table surface from glue, saw kerfs, or water spillage.
Qwas Dogs sit less than .45 inch above the table top allowing you to work on anything from 1/2 plywood to 12/4 hardwood. Perfect for sanding and sawing 1/2 inch plywood. If you regularly work on thinner material, you can special order a thinner head to accommodate.
When you understand the precise grid layout on these great work tables have, why use anything less than a precision bench dog, the Qwas Dog.
Variations of this product
